PPTEMPKIT
DUAL-ZONE DIGITAL
THERMOMETER
WITH WIRELESS REMOTE TEMPERATURE SENSOR
SPECIFICATIONS
OPERATION
Power Probe TeK, LLC. 890 Mariner St. Brea, CA 92821
FEATURES
o
Dual Zone Readings
o
Wireless Remote Sensor
o
Opt. 2
nd
Remote Sensor
o
Bright Backlit LCD
o
°F and °C - Selectable
o
Operating Environment:
o
Measuring Range:
o
Accuracy:
o
Wireless Range:
o
Resolution:
o
Battery Type:
o
Battery Life:
-4°F to 158°F
(-20°C to 70°C)
-4°F to 158°F
(-20°C to 70°C)
±2.0°F (±2.0°C)
60m (195ft.) max.
0.1°
2 x AA and 2 x AAA
400 hours
1.
Remove battery cover from rear of Base Unit.
2.
Install two (2) AA batteries into battery cavity and
replace battery cover.
3.
Press Base Unit Power button for one sec. to turn
ON/OFF.
4.
LCD display will show current temperature of Base
Unit Temp Sensor above the display.
5.
Remove battery cover from rear of Remote Unit
6.
Install two (2) AAA batteries into battery cavity and
replace battery cover.
7.
Slide Remote Unit Power switch to the ON
position. Indicator Light should flash.
8.
When paired, Remote Unit temperature will
display on Base Unit second line.
9.
Press Backlight button to turn LCD backlight
ON/OFF.
10.
Press °C/°F button to change the Base Unit
display reading from Fahrenheit to Celsius.
11.
Press the Cycle/Select button to select optional
second Remote Unit.
-4°F to 158°F
(-20°C to 70°C)
1-800-655-3585 [email protected]
Remote Temp Unit
-
Detachable Remote
Temperature Sensor &
Wireless Transmitter
Remote Unit
ON/OFF Switch
Backlight
ON/OFF
Remote Unit
ON/OFF/BATT
Indicator
Temp Sensor
Connected
Base Unit
Temperature
Remote Unit
Temperature
°C/°F Select
Base Unit
ON/OFF
Remote
Select
Base Unit
Temperature
Sensor
Remote Unit
Temperature
Sensor
Movable
Vent Clip
Base Unit
-
Temperature Sensor &
2ch Wireless Receiver
www.powerprobe.com
INTRODUCTION
o
Thank you for purchasing the Power Probe
PPTEMPKIT Dual Zone Thermometer with
Wireless Remote Temperature Sensor.
o
Please read through this manual in it’s entirety to
fully enjoy the benefits and features of this product.
o
Please keep this manual for future reference.
o
The PPTEMPKIT has a built in temp sensor in the
Base Unit, plus a 2
nd
Remote Unit temp sensor that
transmits the Remote Unit temperature reading
back to the Base Unit.
o
The Remote temp sensor can transmit temperature
readings up to 60m (195ft.) away from Base Unit.
o
Monitor temperature differences – Ambient vs. AC
outlet, Inside vs. Outside Temps, and more.
o
Use moveable clip to attach Remote to air vents or
grilles to monitor outlet temps.
WARRANTY
Power Probe Warranty
o
Power Probe products undergo a strict quality control inspection for workmanship,
function, and safety before leaving the factory. From the date of purchase, we will
warranty/repair Power Probe products for one (1) year against defects in parts and
workmanship. All repairs due to misuse will be charged a fee not to exceed the cost
of the tool. All warranty units must be accompanied by a copy of the original sales
receipt. In the event of a malfunction or defective unit, please call or email your
Power Probe dealer.
