For Technical Support Call 813.689.9932 option 2
Compatible with all C-Monster Control Systems
Programming Instructions
PROGRAM
LED
Hydraulic Pump Unit (HPU)
MICRO Driver Unit
LED
PROGRAM
Pairing Key Fob Remote:
1.
Press and hold the PROGRAM button
on the top of the unit for 3 seconds until
the LED turns green (HPU will also beep).
The unit is now ready to be paired with
the key fob remote.
NOTE: If dual units are installed, repeat
Steps 1-3 to pair multiple units to a
single key fob remote. Up to ten (10) wireless
controllers can be programmed to each unit.
IMPORTANT: Refer to your Installation Manual
for programming dual units.
2.
Press the button on the key fob remote control
for one second and release. The green LED
on the unit(s) will initially turn off, then flash
steadily (HPU will also beep) indicating that
the pairing is complete.
3.
The key fob remote is now paired to the unit.
Test its functionality by following the operating
instructions to ensure that the pairing
procedure was completed successfully.
9010 Palm River Road, Tampa, Florida 33619
phone 813.689.9932 • fax 813.689.8883
power-pole.com
To activate your warranty or find a
Power-Pole Certified Warranty Center,
go to
www.power-pole.com
2
IC RSS-GEN, Sec 7.1.2 Warning Statement
ENGLISH: Under Industry Canada regulations, this radio transmitter may
only operate using an antenna of a type and maximum (or lesser) gain
approved for the transmitter by Industry Canada. To reduce potential radio
interference to other users, the antenna type and its gain should be so chosen
that the equivalent isotropically radiated power (e.i.r.p.) is not more than that
necessary for successful communication.
FRENCH: Conformément à la réglementation d’Industrie Canada, le présent
émetteur radio peut fonctionner avec une antenne d’un type et d’un gain
maximal (ou inférieur) approuvé pour l’émetteur par Industrie Canada. Dans
le but de réduire les risques de brouillage radioélectrique à l’intention des
autres utilisateurs, il faut choisir le type d’antenne et son gain de sorte que
la puissance isotrope rayonnée quivalente (p.i.r.e.) ne dépassepas l’intensité
nécessaire à l’établissement d’une communication satisfaisante.
IC RSS-102, Sec 2.6 Warning Statements
ENGLISH: The applicant is responsible for providing proper instructions to
the user of the radio device, and any usage restrictions, including limits of
exposure durations. The user manual shall provide installation and operation
instructions, as well as any special usage conditions, to ensure compliance
with SAR and/or RF field strength limits. For instance, compliance distance
shall be clearly stated in the user manual.
FRENCH: Le mode d’emploi des appareils destinés à l’utilisation contrôlée
doit aussi inclure des informations sur les caractéristiques de fonctionnement
de l’appareil; les instructions de fonctionnement pour assurer la conformité
avec SAR et / ou les limites d’intensité de champ RF; informations sur
l’installation et l’exploitation d’accessoires pour assurer le respect des
SAR et / ou les limites d’intensité de champ RF; et les coordonnées où
l’utilisateur peut obtenir des informations sur l’exposition canadienne de
radiofréquences et la conformité. Autres renseignements connexes peuvent
également être inclus.
Advanced Key Fob
Remote Control
Featuring Technology
Tilt Orientation Control
The Advance Key Fob Remote Control features
the C-Monster Control System, which gives
this remote the unique ability to sense the key
fob position.
With a push of the button and the movement
of your wrist or arm you can control the
deployment of your Power-Pole anchor.
Tilt
up,
the anchor goes up.
Tilt down,
the anchor
goes down. It even controls dual anchors,
rotate left
and control the port anchor,
rotate right
and control the starboard
anchor,
hold level
and control both.
And depending on the amount of angle you
also control the
speed
or double click for
Auto Up
or
Down
.
See the
Operating Instructions
for complete details and
control your Power-Pole shallow water anchor like never before.
