V4.0
8725319
Please read and understand all instructions before use. Retain this manual for future reference.
SPECIFICATIONS
Frequency
6.8 KHz
Power
9V Battery
Operating Current
0.03A
Operating temp
-5 to +55ºC
INTRODUCTION
The Metal Detector Pinpointer can isolate the location of metal
objects in the immediate vicinity. The pinpointer’s range is 3/4
in. from the probe tip, allowing precise detection even when
the metal object blends in with the soil.
SAFETY
WARNING! Read and understand all instructions before
using this tool. The operator must follow basic
precautions to reduce the risk of personal injury and/or
damage to the equipment.
Keep this manual for safety warnings, precautions, operating
or inspection and maintenance instructions.
1. Use the correct tool for the job. This tool was designed
for a specific function. Do not modify or alter this tool or
use it for an unintended purpose.
2. Control the tool, personal movement and the work
environment to avoid personal injury or damage to tool.
3. Do not operate any tool when tired or under the
influence of drugs, alcohol or medications.
4. Lock tools away and keep out of the reach of children.
UNPACKING
WARNING! Do not operate the tool if any part is missing.
Replace the missing part before operating. Failure to do so
could result in a malfunction and personal injury.
Remove the parts and accessories from the packaging and
inspect for damage. Make sure that all items in the
Identification Key are included.
IDENTIFICATION KEY
A
ON/OFF Knob
C
Probe Stem
B
Holster
D
Battery Cover
OPERATION
The Metal Detector Pinpointer is a precision instrument to
use along with a metal detector. Once the metal detector
has identified a buried object, switch to the pinpointer.
1. Twist the ON/OFF knob (A) to activate the pinpointer.
2. Adjust audio volume with the ON/OFF knob (A).
Start at the midway point and adjust to your
personal preference.
3. Touch the tip of the probe stem (C) to the ground and
slowly move it around the area. An object buried
deeper more than 3/4 in. will not be detected.
4. Loose soil may allow you to insert the probe’s end
into the ground and sift through the dirt. Repeat the
search in this manner.
5. Compact soil will require removal. Do so gently to
avoid damaging the buried item. Repeat the search
and remove additional soil until the item is located.
a. Do not forget to search the soil that is removed
as it may contain the buried item.
CARE & MAINTENANCE
1. Maintain the tool with care. A tool in good condition is
efficient, easier to control and will have fewer problems.
2. Inspect the tool components periodically. Repair or
replace damaged or worn components. Only use
identical replacement parts when servicing.
WARNING! Only qualified service personnel should repair
the tool. An improperly repaired tool may present a hazard
to the user and/or others.
REPLACING THE BATTERY
1. Switch the pinpointer off.
2. Remove the battery cover (D).
3. Pull the battery out and remove the battery cap.
4. Snap a new battery into the cap. The cap will only
snap into place if the polarity connectors are
positioned correctly.
5. Reinsert the battery back into the pinpointer’s body.
6. Place the battery cover back into position and secure
to the pinpointer’s body.
Metal Detector Pinpointer
