Introduction
The
miDock
™
STUDIO
is a portable audio system designed
specifically for iPod and other MP3 players and can be
powered by an AC adapter or batteries. Your
miDock
STUDIO
also charges the battery for your iPod when it is docked
and the AC power adapter is plugged in. The following
information will help you get the most from your
miDock
STUDIO
.
What’s In The Box?
miDock
™
STUDIO
docking system for iPod
dock adapters
remote control
12V, wall-mounted power supply for AC operation
(includes four plug adapters)
Setting Up Your
miDock
™
STUDIO
AC & Battery Operation.
Plug the power supply into
the 12V DC power input jack located on the back of the
miDock
STUDIO
. Choose the proper plug adapter for your
country and slide the adapter onto the power supply until
it clicks into place. Plug the power supply with adapter
into the wall outlet. To enjoy your favorite music anywhere
anytime, install eight (8) C batteries in the battery compart-
ment located on the back of the unit.
You can connect other music sources to your
miDock
STUDIO
auxiliary input jack using a 3.5mm stereo
cable (not supplied).
You can connect headphones (not supplied) to your
miDock
STUDIO
headphone jack for private listening. To keep your
iPod synchronized with iTunes, you can connect your
miDock
STUDIO
to your computer using the USB cable
supplied with your iPod.
Dock Your iPod.
With your
miDock
STUDIO
turned off,
place the dock adapter for your iPod into the docking cradle
and then insert your iPod. Dock adapters for newer iPods
are supplied with the iPod itself. Dock adapters for older
iPods are included with the
miDock
STUDIO
(see
miDock
STUDIO
Adapter Guide). Be sure to use the dock adapter
that matches your iPod to ensure a proper fit and to
prevent connector damage.
For best sound performance, turn off the EQ settings
in your iPod by following the instructions that were
supplied with your iPod.
Remote Control.
Before using the remote control for
the first time, pull out the plastic tab from the battery
compartment. To replace the remote control battery
(CR2025), carefully insert a thin object into the battery
release, slide the tab over and hold it. Then slide the
battery compartment open.
Turn It On, Turn It Up!
Your
miDock
STUDIO
turns on
automatically when you insert your iPod. To play music,
press play on your iPod or remote control.
Caution—Listen To This!
Set your
miDock
STUDIO
volume at a safe level
before playing music.
iPod and iTunes are trademarks of Apple, Inc.,
registered in the US and other countries.
WARNING:
To prevent possible damage to your
iPod, remove it from the docking cradle prior to
transporting your
miDock Studio.
m Dock
™
STUDIO
User’s Guide
Polk Audio Customer Service
800-377-7655 (Outside US & Canada 410-358-3600) M-F, 9
AM
-6
PM EST
, [email protected] For more info visit www.
polkaudio
.com
1
2
3
4
power
/-
track/skip
(hold for
fast forward
or rewind)
remote holder
dock adapter
battery
compartment
opener
Apple
connector
aux
headphones
12v DC
