Product Description
Polycom
®
RealPresence Digital Brkout, Camera- Adapter for Videoconferencing Equipment
The Polycom RealPresence Digital Brkout, Camera, is a breakout adapter that allows the digital cameras, the
Polycom EagleEye IV, and the Polycom EagleEye Acoustic, to be broken out into HDMI and Serial (DB9) signals.
Polycom
®
RealPresence Digital Brkout, Codec - Adapter for Videoconferencing Equipment
The Polycom RealPresence Digital Brkout, Codec, allows the input of HDMI and Serial for control into an HDCI
input on the RealPresence Group Series codecs.
The two EagleEye Digital Breakout Adapters can be used together to extend the distance from EagleEye IV
cameras to the Group Series codecs.
Setting up the Polycom® EagleEye™ Digital Breakout Adapter
RealPresence Digital Brkout, Camera
To connect the equipment with HDMI and RS-232,
use compliant cables.
RealPresence Digital Brkout, Codec
To connect the equipment with HDMI and RS-232,
use compliant cables.
Package Contents and Optional Accessories
Package Contents of RealPresence Digital Brkout,
Camera adapter for Videoconferencing Equipment
consists of:
- RealPresence Digital Brkout, Camera adapter,
- power supply (optional). Use only the approved
power supply from Polycom (1465-52748-040). This
product is rated 12VDC, 3A. This power rating should
not be exceeded. Verify the polarity of the power
supply.
Optional Accessories: cables – not included.
Package Contents of RealPresence Digital Brkout,
Codec adapter for Videoconferencing Equipment
consists of:
- RealPresence Digital Brkout, Codec adapter.
Optional Accessories: cables – not included.
Best Practices and Safe Use
RealPresence Digital Brkout, Camera
:
•
Use the supplied Polycom power supply (part number 1465-52748-040).
•
Verify the polarity of the power supply as shown on the DBA next to the power supply input.
•
Use with HDCI Polycom EagleEye IV Camera Cable. Either 2457-64356-001 (3m); 2457-64356-100 (1m), or
2457-64356-018 (457mm).
•
Use with certified HDMI compliant cable.
•
Use with certified EIA/TIA-RS-232 cable. Use straight-through type, not crossover.
•
Do not hot plug the serial cable. Disconnecting or connecting the RS-232 cable during operation may cause
unexpected system behavior. If this happens, cycle the power to the codec or camera to eliminate this issue.
•
The signal quality is dependent on the quality of the HDMI and serial signals at the output of the DBA and
associated cables, if the mating device has an equalizer, and the electrical noise in the installed environment.
To ensure proper operation with all devices, the HDMI and EIA/TIA-RS-232 specs should be met at the input
to all mating devices.
RealPresence Digital Brkout, Codec
:
•
Use with HDCI Polycom EagleEye IV camera cable. Either 2457-64356-001 (3m), 2457-64356-100 (1m), or
2457-64356-018 (457mm).
•
Use with certified HDMI compliant cable.
•
Use with certified EIA/TIA-RS-232 cable. Use straight-through type, not crossover.
•
Do not hot plug the serial cable. Disconnecting or connecting the RS-232 cable during operation may cause
unexpected system behavior. If this happens, cycle the power to the codec or camera to eliminate this issue.
•
Polycom tested with cables less than 3 meters in a normal environment. The maximum cable length possible
depends on the signal quality of the HDMI and serial signals at the output of the DBA and associated cables,
if the mating device has an equalizer, and the electrical noise in the installed environment. To ensure proper
operation with all devices, the HDMI and EIA/TIA-RS-232 specs should be met at the input to all mating
devices.
•
The following HDMI features are not provided: DDC for EDID support, HDCP, and CEC.
•
Without EDID support, digital (HDMI) sources connected to the system must have a mechanism for bypassing
EDID detection, for setting up the video resolution manually, or using a fixed video resolution. Refer to the
Video Format Resolutions table below for supported resolutions.
•
The signal quality is dependent on the quality of the HDMI and serial signals at the output of the DBA and
associated cables, if the mating device has an equalizer, and the electrical noise in the installed environment.
To ensure proper operation with all devices, the HDMI and EIA/TIA-RS-232 specs should be met at the input
to all mating devices.
Supported Video Format Resolutions
Mode
Active Pixels
Active Lines
Vertical Refresh Hz
Pixel Clock MHz
Video Standard
480i
720
480
59.94
27
CEA-861-D:6
576i
720
576
50
27
CEA-861-D:21
480p60
720
480
59.94
27
CEA-861-D:2
576p50
720
576
50
27
CEA-861-D:17
720p50
1280
720
50
74.25
CEA-861-D:19
720p60
1280
720
59.94
74.25/(1.001)
CEA-861-D:4
1080i50
1920
1080
50
74.25
CEA-861-D:39
1080i60
1920
1080
59.94
74.25/(1.001)
CEA-861-D:5
1080p50
1920
1080
50
148.50
CEA-861-D:31
1080p60
1920
1080
59.94
148.50/(1.001)
CEA-861-D:16
Parameters and Interfaces
RealPresence Digital Brkout, Camera:
•
Includes its own power supply (part number 1465-52748-040 100-240VAC, 1.3A, 50/60Hz; 12VDC at 3.3A.
Verify the polarity of the power supply as shown on the Digital Breakout Adapter next to the power supply
input.
•
Operating ambient conditions: Operating temperature 0°C to 40°C, Relative Humidity: 35% to 90% non-
condensing @ 40°C.
RealPresence Digital Brkout, Codec:
•
Has no active components. Operating ambient conditions: Operating temperature 0°C to 40°C, Relative
Humidity: 35% to 90% non-condensing @ 40°C.
European EMC Immunity standard (EN55024:2010) testing was performed using cables less than 3 meters in
length.
Installation Requirements
Installation must be performed in accordance with all relevant national wiring rules. The outlet to which this
apparatus is connected must be installed near the equipment and must always be readily accessible. The user is
cautioned that any changes or modifications not expressly approved by Polycom, Inc. could void the user
’
s
authority to operate the equipment. This product is only for use in commercial, and light industrial areas.
Safety Considerations for Storage and Transportation
•
The RealPresence Digital Brkout, Camera has a seven year period of life. The EagleEye Digital Breakout
Adapter has a seven year period of storage.
•
The RealPresence Digital Brkout, Codec has a -30°C to 60°C (-22°F to 140°F), 35% to 90% non-condensing
@ 40°C storage & transportation requirement.
Polycom
®
RealPresence Digital Brkout, Camera and RealPresence Digital Brkout, Codec
Quick User Guide
December 2014 | 3725-68908-001D
