pmv
mounts
.co.uk
Read these instructions carefully before assembling this equipment.
Check the equipment has been supplied with all parts and fixtures prior to assembly.
Assemble in a suitable location.
Two people will be required for assembly and three persons for installation of the screen on to the equipment.
Do not attempt to alter or modify any part of the equipment or its attachments.
Do not use if any parts are broken or appear to be damaged.
Tighten all bolts and fixings securely with appropriately sized tools.
Only use fixings provided with this bracket.
Do not position the equipment close to sources of heat or moisture.
Assembly instructions for XXL TV trolley
Maximum TV fixing points up to 1200mm X 600mm - Up to 135Kgs
Component checklist
TV mounting plate
X1
Welded base unit with colour coded trims
X1
Model No.
PMVTROLLEYXXL
Factory No.
Z65100TR
600mm Upright with
joining plate
X2
1200mm Upright with
joining plate
X2
600mm Trim
inserts
X6
Assembly kit checklist
D
- M8 x 16mm
F
- M8 nut
A
- M6 x 12mm
E
- M8 washer
C
- M8 x 20mm
B
- M6 washer
X16
X16
X6
X4
X4
X4
TV Fixing Kit
P
- M6 x 20mm
N
- M8 x 6mm
O
- M8 x 12.5mm
L
- M6 x 6.5mm
M
- M8 x 6.5mm
K
- M8 washer
G
- M6 x 30mm
J
- M8 x 50mm
I
- M8 x 30mm
H
- M6 x 50mm
X4
X4
X4
X4
X2
Cable
management
gully
Inside face of extrusion
Trim insert
Trim insert
Outside face of extrusion
Slider gully
Top down view
Isometric view
Trim inserts:
Flexible black trims can be popped in or slid down the extrusions during or after assembly.
Note:
The trims can be cut with a safety knife or scissor to make small entry and exit points for cables.
TV mounting arms
X2
100mm braked castors
X4
TV mounting
plate slides
X2
Upright trim pieces
X2
Glide feet
X4
