Attach Ceiling Plate To Ceiling
1
Projector Fixing Kit
B
- M4 x 12mm
C
- M5 x 12mm
D
- M6 x 12mm
A
- M3 x 10mm
E
- M4 x 16mm
F
- M5 x 16mm
G
- M6 x 16mm
H
- M5 x 12mm
J
- Tilt locking bolt M6 x 55mm
I
- Extension arm
K
- Tilt locking nut
L
- Tilt locking washer
Also required
x4
x4
x1
x4
x1
x1
pmv
mounts
.co.uk
Mounting instructions for ultra-close coupled projector mount with
PROMETHEAN adapter.
Maximum projector fixing points up to 300mm x 300mm - Up to 15Kgs
Model No.
PMVMOUNT6PM
Factory No.
Ÿ
Read these instructions carefully before installing your equipment.
Ÿ
Install the mount in a suitable location using fixings which are appropriate for
the ceiling material and structure. Consult a qualified builder if you’re in any doubt as
to the structural integrity of the ceiling.
Ÿ
Do not attempt to alter or modify any part of the ceiling mount or its attachments.
Ÿ
Do not use if any parts are broken or appear to be damaged.
Ÿ
Tighten all bolts and fixings securely. Only use fixings provided with this bracket.
Ÿ
Do not mount your projector close to sources or heat or moisture.
Ÿ
Always have a minimum of two persons to install the projector on to the mount.
A-G
NOTE:
Do not tighten
screws at this stage
NOTE:
To locate fixing points on projector, consult
the projector user manual. Position arms
over fixing points with the plate as central
as possible to the projector body.
NOTE:
Once the plate is positioned in the desired
location then all the fixing screws can be
tightened.
a
b
c
M3&M4 M5 M6
