background image

1

Projector

CP-X2021WN/CP-X2521WN/
CP-X3021WN

User's Manual (detailed) 
Operating Guide

Thank you for purchasing this projector.

Before using this product, please read all manuals for this 

product. Be sure to read 

Safety Guide

 

rst. After reading them, store them in a 

safe place for future reference.

WARNING

• The information in this manual is subject to change without notice.

• The manufacturer assumes no responsibility for any errors that may appear in 
this manual.
• The reproduction, transfer or copy of all or any part of this document is not 
permitted without express written consent.

NOTE

Trademark acknowledgment

Various symbols are used in this manual. The meanings of these symbols are 
described below. 

About this manual

WARNING

CAUTION

This symbol indicates information that, if ignored, could possibly 
result in personal injury or even death due to incorrect handling.
This symbol indicates information that, if ignored, could possibly 
result in personal injury or physical damage due to incorrect 
handling.

Please refer to the pages written following this symbol.

 

•  Mac

®

 is a registered trademark of Apple Inc.

•  Windows

®

, DirectDraw

®

 and Direct3D

®

 are registered trademarks of Microsoft Corporation 

in the U.S. and/or other countries.

•  VESA and DDC are trademarks of the Video Electronics Standard Association.
•  HDMI, the HDMI logo, and High-De

nition Multimedia Interface are trademarks or registered 

trademarks of HDMI Licensing LLC in the United States and other countries.

•  Trademark PJLink is a trademark applied for trademark rights in 

Japan, the United States of America and other countries and areas.

•  Blu-ray Disc

TM

 and Blu-ray

TM

 are trademarks of Blu-ray Disc  

Association.

All other trademarks are the properties of their respective owners.

NOTICE

This entry notices of fear of causing trouble.

Summary of Contents for CP-X2021WN



















































































































































































































































Reviews: