![background image](http://html.mh-extra.com/html/philio/pan05-1a/pan05-1a_user-manual_1537971001.webp)
1
PAN05-1A/-2A/-3A
In Wall Single relay (1 way) switch
module
P
Fig 1. Assembling
This in-wall switch module is a transceiver which is a security enabled device which
based on Z-Wave Plus technology, and it is fully compatible with any Z-Wave
TM
enabled network. Mini size design let the module can easily hide itself into the wall
box and that will be good for the house decoration. Since PAN05 supports Security
Command Class, it can learn with Secured controller. Its functionality and supported
command classes is identical when included as a secure and non-secure device.
There are many kind of application by using the module to switch Load On and Off,
one main application is the light control. If connect the COM terminal directly to AC
Line terminal, the new smart relay calibration technology can reduce the inrush
current caused by the load and let the module work perfectly with many kind of light
like incandescent, fluorescent and LED light. This module can also connect to
alternative power supply like DC 12V to switch on/off 12V MR-16 light as follow
picture.
Adding to Z-Wave
TM
Network
In the front casing, there is an on/off button with LED indicator below which is used to
toggle switch on and off or carries out inclusion, exclusion, reset or association.
When first power applied, its LED flashes on and off alternately and repeatedly at 0.5
second intervals. It implies that it has not been assigned a node ID and start auto
inclusion.
Auto Inclusion
The function of auto inclusion will be executed as long as the in wall switch does not
have Node ID and just connect the switch to main power.