Spring Washer
Flat Washer
Screw
Mounting
Bracket
MOUNTING
BRACKET
DIAGRAM
REMOTE
POWER
GROUND
1. Choose a mounting location on a flat surface away from heat
and moisture. Be sure the location and the drilling of pilot
holes for mounting will not present a hazard to any wires,
control cables, fuel lines, fuel tanks, hydraulic lines, or other
vehicle systems or components. Choose a location with
unimpaired air circulation and do not mount upside down.
2. D i s c o n n e c t t h e n e g a t i v e ( - ) b a t t e r y t e r m i n a l .
NOTE: Check your vehicle's owner's manual before
disconnecting the battery. Disconnecting the battery in
some vehicles may require an anti-theft code when
reconnecting for stereo operation. Some vehicles may
run rough after reconnecting the battery and require
service to have the on-board computer reset. Check with
your local dealer if you are uncertain.
3. Run suitable AWG wire to where the subwoofer will be
mounted (run 1 foot extra than you think you will need). Use
rubber grommets where wires will pass through the firewall or
other areas of the vehicle. Make certain a fuse holder is
placed within 18 inches of the vehicle battery – this is
mandatory. Do not place a fuse in the fuse holder at the
battery at this time.
4.
Ground the subwoofer using the same AWG wire size used
for the power cable. Make sure the ground location is a clean,
unpainted metal surface.
5. Run the RCA and Remote turn-on lead to the subwoofer from
the head unit.
6. Place "the 15 amp fuse in the fuse holder at the battery.
7. Set the input level control (GAIN) to "MIN".
8. Turn head unit on and adjust as necessary.
RCA Cables (Not Included)
Battery
(+)
-
( )
Need help?
For technical
assistance, call the
Audiovox customer
support line at
1-800-323-4815.
IMPORTANT: Incorrect wiring connections can damage the unit. Follow the wiring
instructions carefully, or have the installation handled by an experienced technician.
RCA Output
RCA Input
A
A
B
B
Minimum Wire Size:
+12V - 10 AWG
Ground - 10 AWG
When RCA preamp outputs are not available on your radio, use the supplied Hi-Level adapter.
Connect the speaker outputs from the radio to the speaker wire input on the Hi-Level adapter,
then connect the RCA outputs from the adapter to the UBB6600 RCA inputs.
Speaker Input Wires
RCA Output
90 Day Limited Warranty
AUDIOVOX CORPORATION (the Company) warrants to the original retail purchaser of this
product that should this product or any part thereof, under normal use and conditions, be proven
defective in material or workmanship within 90 days from the date of original purchase, such
defect(s) will be repaired or replaced with new or reconditioned product (at the Company's option)
without charge for parts and repair labor. To obtain repair or replacement within the terms of this
Warranty, please contact Jensen at the telephone number provided below.
This Warranty does not extend to the elimination of car static or motor noise, to correction of
antenna problems, to costs incurred for installation, removal, or reinstallation of the product, or
damage to tapes, compact discs, accessories or vehicle electrical systems. This Warranty does
not apply to any product or part thereof which, in the opinion of the Company, has suffered or been
damaged through alteration, improper installation, mishandling, misuse, neglect, accident, or by
removal or defacement of the factory serial number/bar code label(s) or markings. THE EXTENT
OF THE COMPANY'S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR
REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL THE COMPANY'S LIABILITY
EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT.
This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES,
INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, SHALL BE LIMITED TO THE
DURATION OF THIS WRITTEN WARRANTY. ANY ACTION FOR BREACH OF ANY
WARRANTY HEREUNDER INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY
MUST BE BROUGHT WITHIN A PERIOD OF 90 DAYS FROM DATE OF ORIGINAL
PURCHASE. IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL
OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS
OR IMPLIED, WHATSOEVER. No person or representative is authorized to assume for the
Company any liability other than expressed herein in connection with the sale of this product.
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or
limitation of incidental or consequential damage so the above limitations or exclusions may not
apply to you. This Warranty gives you specific legal rights and you may also have other rights
which vary from state to state.
U.S.A: 1-800-645-4994
CANADA: Call 1-800-645-4994 for location of warranty station serving your area.
Hi-Level Input
FREQ
The Low Pass Filter controls adjust the crossover point from 50Hz to 125Hz.
Typical crossover is between 60Hz and 80Hz for ported and sealed enclosures.
Bandpass boxes will typically use a higher crossover setting. Depending on your
sub-woofer/box combination, the crossover may be set anywhere between 50Hz
and 125Hz. Since musical tastes vary, you should play music that you would
normally listen to in your vehicle, with the above settings as a starting point. If
necessary, set the crossover by ear.
GAIN
The input level control matches the output of your head unit to the input of the
amplifier. Matching the levels of the head unit and amp give you the highest signal
to noise ratio and ensures that the volume control is useful throughout it's entire
range.
PHASE
The phase of the subwoofer can be reversed 180
°
relative to the front and rear
amplifier channels. In some installations, this can be extremely useful since the
interior dimensions of certain vehicles can create "dead spots" (cancellations)
affecting
your low bass/mid-bass impact.
RCA Input
Indicators and Controls
FREQ
GAIN
PHASE
NOR.
REV.
MIN. MAX.
50 125
NOTE:
Do not block the two bass ports. Leave at least
4" for proper subwoofer operation.
UBB6600 Amplified Subwoofer Quick Start Guide
