Sony SA-WM500, Service Manual

Page: 1 / 12

SA-WM500
SERVICE MANUAL
SPECIFICATIONS
US Model
Canadian Model
AEP Model
UK Model
E Model
Australian Model
ACTIVE SUBWOOFER
Ver. 1.3 2006.08
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
With 6 ohm loads, from 20 – 200 Hz; rated 150 watts, minimum RMS
power, with no more than 0.7 % total harmonic distortion from 250
milliwatts to rated output.
System
Type
Active Subwoofer (magnetically shielded design)
Speaker unit
Woofer: 30 cm dia. (12 in.), cone type
Amplifier section
Continuous RMS output : (0.7%) 150W
Reproduction frequency range
20 Hz – 200 Hz
High frequency cut-off frequency
50 Hz – 200 Hz
Phase selector
NORMAL, REVERSE
Inputs
Input jacks
LINE IN: input pin jack
SPEAKER IN: input terminals
Output jacks
LINE OUT: output pin jack
SPEAKER OUT: output terminals
General
Power requirements
USA and Canada models: 120 V AC, 60 Hz
AEP, UK, MY, SP, TH models: 230 V AC, 50/60 Hz
AUS model : 240V AC, 50/60 Hz
TW model : 110 V AC, 60Hz
Power consumption
120 W
Dimensions
Approx. 360 x 425 x 412 mm
(14
1
/
4
x 16
3
/
4
x 16
1
/
4
in.) (w/h/d)
Mass
18 kg (39.6 lb 1oz)
Supplied accessories
Foot pads (4)
Audio connecting cord (1 phono – 1 phono),
2 m (6 ft 6
1 /
2
in.) (1)
Speaker cords, 2.5 m (8 ft 2
1
/
2
in.) (2)
Design and specifications are subject to change without notice.
Sony Corporation
Home Audio Division
Published by Sony Techno Create Corporation
9-877-136-04
2006H02-1
© 2006.08