![background image](http://html.mh-extra.com/html/perfect-water-technologies/home-master-standard-ro/home-master-standard-ro_service-manual_1529318001.webp)
Customer Service Hotline 1-877-693-PURE
Page 16
Home Master® Reverse Osmosis System—Owners Manual
10 Tips for an Easy and Successful Installation
1.
Keep it simple - there are 4 connections to make, and the tubing is color coded.
VIDEO INSTRUCTIONS ARE AVAILABLE ONLINE (6 PARTS)
2.
Have plenty of time, light, space, and towels before getting started. If everything goes well,
you should be done in 45 minutes. However, if your feed water line is a different size, or if you
don’t have an extra hole for the faucet, it can take somewhat longer.
3.
NEVER use plumber’s putty, thread-lock, or anything else you wouldn’t eat on any part of
this system. You may use as much white Teflon plumber’s tape as you like. If you use plumber’s
putty on your faucet, you will have disgusting and potentially toxic water for the life of the fau-
cet.
4.
Mount the faucet first, and when making the final connection, use the quick connect faucet
adapter found in the bag of parts with the EZ adapter, tank valve, and drain clamp.
5.
If you have a 3-hole sink and want to avoid drilling a 4
th
hole for the RO faucet, then get a
single handle
kitchen
faucet. This will free up 2 holes, one of which you may use for the RO fau-
cet, the other you can use for a soap dispenser or side sprayer.
6.
Mount the Home Master® RO vertically so that the blue cap is on top. There is only one “blue
cap” and it has only one fitting at its top. Mount the (optional) permeate pump correctly or noth-
ing will work. There is a long arrow on the permeate pump, make sure it points up.
7.
Mount the drain saddle on a vertical section of drain pipe. IF you have to mount the drain
saddle on a horizontal section, then drill the hole on the top side of the pipe or at least at an an-
gle where the drain water from the Home Master® RO drops down into the drain pipe. [Think of
a manhole passage into the sewer] When making the connection from the system to the drain
saddle - wrap the tubing around the drain pipe a few times, so that some loops of tubing are
higher than the fitting.
8.
DO NOT touch the air nipple on the side of the reserve tank. You may be tempted to check
the pressure, or pump it up – don’t. It already has plenty of air. Adding more will not boost flow,
it will only decrease tank capacity.
9.
Read the instructions thoroughly before beginning. There is a lot of information there, some
of which you may not need for your application. If you have questions – call or email. Email will
usually be answered within hours even at night.
10.
Have patience. Your new Home Master® RO may take some time to break in and start flow-
ing. Make sure you fill, and drain, the reserve tank at least twice.
Perfect Water Technologies, Inc.
Copyright © 2014
TUBING COLOR CODING
ORANGE
—LINE IN
BLACK—TO STORAGE TANK
RED
— TO DRAIN
BLUE
—TO RO FAUCET
Customer Service Hotline 1-877-693-PURE
Perfect Water Technologies
Home Master
®
Reverse Osmosis System
Installation & Service Manual
Home Master
®
Standard RO
Home Master
®
Artesian Full Contact
Home Master
®
IRON
Home Master
®
UV
Home Master
®
ULTRA
Home Master
®
HydroPerfection