PELICAN
TM
INSTRUCTION MANUAL
This compact flashlight produces an ultra bright light
beam by using a LED powered by (1) one AAA 1.5V
alkaline battery. The 1910 flashlight is designed for
easy use with one hand operation and has a
dual-switch mode for constant-on and momentary-on.
The 1910 flashlight body is made by high precision
CNC machines from aircraft-grade aluminum alloy for
the most durable construction. The 1910 flashlight is
water resistant.
TO INSERT BATTERY
1.
Remove the tail cap by turning counter-clockwise.
2.
Install (1) one AAA alkaline battery with + terminal
facing to the head assembly.
3.
Replace the tail cap onto the flashlight by turning
clockwise until sealed.
OPERATION
High > Low > Off
1. MOMENTARY -
Gently depress the tail button for momentary
operation.
Press once for high, press again (within a half
second) to change from high to low.
2. CONSTANT ON -
• Single click for High
• Three clicks (no more than a half second between
clicks) for low
3. LIGHT-OFF -
Press the tail button to turn OFF.
TO CHANGE BATTERY
1.
Remove the tail cap by turning counter-clockwise
until it comes off the rear of the 1910 flashlight.
2.
Remove the (1) one used battery from the 1910
flashlight.
3.
Install the (1) one new AAA alkaline battery
with + terminal facing to the head assembly.
4.
Replace the tail cap by turning clockwise until
sealed.
GENERAL CARE AND MAINTENANCE
1.
Clean o-rings with a soft clean cloth to insure that
sealing area is free of dirt that could destroy the o-ring
seal.
2.
Apply a light coat of clear silicone grease on the o-rings
occasionally if turning action becomes too difficult.
3.
Remove the tail cap and wipe the rear threads of the
1910 flashlight body and inside of the tail cap with a
soft clean cloth occasionally to avoid intermittent
flashlight operation.
CAUTION
To prevent the 1910 flashlight coming on
accidentally when the flashlight is stored, remove the
batteries. If the 1910 flashlight is turned on while it is in
a container, the flashlight can overheat and damage the
flashlight or the material of the surrounding area.
SPECIFICATIONS
BULB:
LED
Batteries:
(1) One AAA alkaline or other
equivalent alkaline battery
O-RING MAINTENANCE
Check closely for cuts, scratches, or otherwise
damaged o-ring or mating lens lip surface. Remove any
dirt or foreign matter from o-ring sealing surfaces. Keep
threads, o-ring groove and inside lip of lens lubricated with
silicone grease. See Warranty information for replacement
of o-ring.
Battery Safety Information
WARNING: HANDLE AND STORE BATTERIES
PROPERLY TO AVOID INJURY OR DAMAGE
BATTERIES CAN BE DANGEROUS!
Most battery issues arise from improper handling of
batteries, and particularly from the use of damaged
or counterfeit batteries. Please review the
information below to avoid serious injury and/or
damage to your property.
Alkaline Batteries
1. For those lights with hazardous location safety
approvals for explosive environments please
be advised that the safety approval is only valid
for the specified battery type manufacturer
and, where applicable, brand names that are
displayed on the flashlight and/or instructions
sheets that are supplied with the light. The use of
other battery technologies may reduce the
performance of the flashlight and will invalidate
the safety approval.
2. Always read the battery manufacturers
recommendations for the appropriate use of
the battery technology/brand prior to using the
flashlight.
3. When replacing the batteries:
a. Replace all the batteries at the same time.
b. Do not mix battery brands and old and new
batteries.
c. Always insert batteries correctly with regard
to polarity
(+ and -) marked on the battery and
equipment.
4. Do not change batteries in a hazardous location.
5. Remove batteries from equipment if it is not to be
used for an extended period of time.
Always dispose of all batteries properly at an
approved battery recycling center.
1910
Cat. #1910
1913-311-001 5-9157 Rev A
© 2013 Pelican Products NO/13
All trademarks are registered and/or unregistered trademarks
of Pelican Products, Inc., its subsidiaries and/or affiliates.
PELICAN
TM
PRODUCTS
23215 Early Avenue • Torrance, California 90505 USA
Tel 310.326.4700 • FAX 310.326.3311 • www.pelican.com
PELICAN
TM
CANADA
10221-184 St. • Edmonton, Alberta T5S 2J4
Tel 780.481.6076 • FAX 780.481.9586
PELI
TM
PRODUCTS, S.L.U.
c/ Provença, 388, Planta 7 • 08025 • Barcelona, Spain
Tel: +34 934 674 999 • Fax: +34 934 877 393
PELICAN LIMITED LIFETIME GUARANTEE OF
EXCELLENCE
Pelican Products, Inc. guarantees its lights for a lifetime
against breakage or defects in workmanship. This
guarantee does not cover the lamp or batteries.
Pelican will either repair or replace any defective
product, at our sole option. TO THE EXTENT
PERMITTED BY LAW, THE REMEDIES HEREBY
PROVIDED SHALL BE THE EXCLUSIVE AND SOLE
REMEDY OF THE PURCHASER.
TO THE EXTENT PERMITTED BY LAW: (A) THIS
WARRANTY IS IN LIEU OF ALL WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE; AND (B) ALL OTHER
IMPLIED WARRANTIES AND ANY LIABILITY
NOT BASED UPON CONTRACT ARE HERBY
DISCLAIMED AND EXCLUDED.
TO THE EXTENT PERMITTED BY LAW, IN
NO EVENT SHALL PELICAN BE LIABLE FOR
ANY INDIRECT, PUNITIVE, INCIDENTAL OR
CONSEQUENTIAL DAMAGES, OR SPECIAL
DAMAGES, REGARDLESS OF WHETHER A CLAIM
FOR SUCH DAMAGES IS BASED ON WARRANTY,
CONTRACT, NEGLIGENCE OR OTHERWISE. To
the extent permitted by law, in no event shall Pelican’s
liability to the purchaser for damages hereunder exceed
the purchase price of the product in respect of which
damages are claimed.
To make a warranty claim, the purchaser must
contact Pelican Products, Inc. at 23215 Early Avenue,
Torrance, CA 90505 or [email protected], or
by calling 1-800-473-5422, extension 5. Any warranty
claims shall be made by the purchaser as soon as
practicable. The purchaser must obtain a return
authorization number from Pelican Customer Service
prior to returning any product, and is responsible for
paying for all warranty freight costs. If Pelican
determines that any returned product is not defective,
within the terms of this warranty, the purchaser shall
pay Pelican all costs of handling, return freight and
repairs at Pelican’s prevailing rates.
All warranty claims of any nature are barred if the
flashlight has been altered, damaged or in any way
physically changed, or subjected to abuse, misuse,
negligence or accident.
Some states and countries do not allow limitations on
how long an implied warranty lasts or the exclusion or
limitation of incidental or consequential damages, so
the above limitation or exclusion may not apply to you.
This warranty gives you specific legal rights, and you
may have other rights which vary from state to state
and country to country.
In Australia: The benefits provided to you under this
warranty are in addition to your rights and remedies
as a consumer under the Competition and Consumer
Act 2010 (Cth). Nothing in this warranty limits the
rights or obligations of a party under provisions of the
Competition and Consumer Act 2010 (Cth) in relation
to the supply to consumers of goods which cannot be
limited, modified or excluded. If applicable, our goods
come with guarantees that cannot be excluded under
the Australian Consumer Law. You are entitled to a
replacement or refund for a major failure and
compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the
goods repaired or replaced if the goods fail to be of
acceptable quality and the failure does not amount to
a major failure. If you are not a consumer under the
Competition and Consumer Act 2010 (Cth), then your
rights may be limited. To make a warranty claim, the
purchaser must contact Pelican Products Australia,
Suite 2.33, West Wing, Platinum Bldg., Erina NSW
2250, Tel: +612 4367 7022.
Any warranty claims shall be made by the purchaser
as soon as practicable. The purchaser must obtain a
return authorization number from Pelican Customer
Service prior to returning any product, and is respon-
sible for paying for all warranty freight costs. If Pelican
determines that any returned product is not defective,
within the terms of this warranty, the purchaser shall pay
Pelican all costs of handling, return freight and repairs at
Pelican’s prevailing rates. In the event that Pelican
determines that any returned product is defective, within
the terms of this warranty, Pelican shall pay the
purchaser all reasonable costs of the purchaser in
making claim under this warranty.
Lifetime Guarantee does not cover Roto Molded cases,
AALG products or fabric portion of backpacks. Refer to
www.pelican.com/warranty for full details.
LED
