background image

Before Use

Basic

Operations

Advanced

Operations

Reference

Thank you for purchasing this Panasonic product.
Please read these instructions carefully before using 
this product, and save this manual for future use.
This product is intended for household use and is 
not intended for commercial use. Refer to the 
warranty for details.

Operating Instructions

Washing Machine

Maintenance  ................................... 22
Troubleshooting  .............................. 24
Error Codes  ..................................... 26
Specifications  .................................. 27

Safety Precautions  ............................ 2
Name of Parts/Accessories  ............... 4
Installation  ......................................... 6

Washing  .......................................... 10
Cycle Guide  .................................... 12

Getting the Laundry Ready  ............. 14
Cotton-Eco Cycle  ............................ 15
Washing Delicate Clothes  ............... 16
Washing Blankets  ........................... 17
Wash/Rinse/Spin Individually  .......... 18
Air Dry  ............................................. 19
About Detergent  .............................. 20

Contents

Model No.

NA-FS95G3WAU/NA-FS85G3WAU
NA-FS95G3WNZ/NA-FS85G3WNZ

(Domestic use)

1$)6B*BHQJLQGG

Summary of Contents for ECONAVI NA-FS85G3WAU





























Reviews: