10400839-001
©2017 Overland Storage, Inc.
Page 1 of 4
*10400839
001*
NEO
®
Agility 48 Appliance
Add-on/Spare 10GbE Card Instructions
This document describes how to either add a new, or remove
and replace an existing, 10Gb Ethernet card in a NEO
Agility 48 appliance from Overland Storage.
WARNING:
To reduce the risk of electric shock or damage to
equipment, always remove any power cords while working with
the appliance.
WARNUNG:
Um das Risiko eines elektrischen Schlags oder
Schäden am Gerät zu vermeiden, ziehen Sie stets den
Netzstecker, bevor Sie an der Einheit arbeiten.
AVERTISSEMENT:
Pour réduire le risque de choc électrique
ou endommagement de l'équipement, retirez toujours les
cordons électriques en travaillant avec l'appareil.
CAUTION:
While working with the appliance, observe
standard Electrostatic Discharge (ESD) precautions to prevent
damage to micro-circuitry or static-sensitive devices.
Prepare the Appliance
Power Appliance Off
CAUTION:
To prevent data corruption and loss, verify that all
processes are inactive and idle before shutting down the NEO
Agility appliance.
1.
Using either console or remote desktop, log into the
appliance as an
administrator
.
2.
Verify that all host processes are
idle
.
3.
From the
Agility Management Console
, verify that all
queued tape write operations have completed.
Review the last entries in the
Diagnostics > System
log for
the Flush Cache > SUCCEEDED events for all tape
drives.
4.
Right-click the Windows logo in the lower-left corner and
select
Shutdown
or
sign out > Shutdown
.
5.
When all the LEDs are off, disconnect the
power cords
from their sockets.
6.
Disconnect the remaining
cables
from the unit ports,
noting their locations.
Remove the Bezel
1.
If needed, use the
supplied key
to unlock the bezel.
2.
Press in the
latch
on the right to release the bezel.
3.
Carefully swing the
bezel
out, remove it from the
appliance, and set it aside.
System Log
Power Sockets
Cable Ports
