![background image](http://html1.mh-extra.com/html/ottlite/964008/964008_quick-start-manual_1658900001.webp)
A
B
E
C
F
F
D
15w Telescoping Lamp
CDO-003
964008
964PN8
964218
964508
964088
915808 915218
Telescoping Lamp
ENGLISH
CAUTION!
If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer
or its service agent or a similar qualified person in order to avoid a hazard. Indoor use only.
CONGRATULATIONS!
You’ve purchased the finest in natural
lighting technology with your new
OttLite
®
product.
PRODUCT REGISTRATION FORM
Please complete the enclosed Product
Registration Form and return it today
by mail, or register online by going to:
http://warranty.OttLite.com.
1. Remove lamp from packing and
place the base (E) flat on a steady
surface.
2. Refer to BULB INSTALLATION AND
REMOVAL to install bulb (A) to lamp.
3. Plug the cord into a standard
120Vac outlet.
4. To turn the lamp on or off rotate
the wheel of the power cord mounted
switch.
5. To adjust postion of shade (B) simply
grasp the shade with one hand while
holding the base steady with the other.
The shade can move up and down at
pivot (C). Shade (B) can also be
adjusted by swiveling the pole in a
circular direction at the base (E).
6. To adjust the height of the shade (B),
grasp the telecoping pole (D) and pull
or push while holding the base steady
with the other hand.
If the ball joints connecting the shade
to the pole are too loose, tighten
screws (F).
NOTE: DO NOT try and move shade
(B) beyond the limits of pivot (C)
as lamp damage may occur. To
prevent damaging the lamp, DO
NOT turn or rotate the telescoping
pole (D).
TUBE INSERTION/REPLACEMENT
1. Make sure that the lamp is not
plugged into an electrical socket.
2. If the lamp has been in use, allow
it to cool approximately 5 minutes
before proceeding.
3. To install a bulb (A) in the socket
inside the shade (B), hold bulb (A)
firmly by the glass end and carefully
thread it into the socket turning
clockwise until snug (DO NOT
overtighten as removal may be dif-
ficult).
4. To remove a bulb (A) already
installed in the lamp, grasp it firmly
at the glass end and gently but firmly
rotate it counterclockwise. DO NOT
allow bulb to strike any hard surface.
Please note that in operation, OttLite
®
tubes are not dimmable.
Enjoy your OttLite
®
Telescoping Lamp!
This lighting system is designed
for use with OttLite
®
type (style
number ED15-S). Use of other prod-
ucts voids the warranty and may
result in damage to the lighting sys-
tem.
CAUTION! IMPORTANT SAFETY INSTRUCTIONS:
THIS PORTABLE LAMP HAS A POLARIZED PLUG (ONE BLADE IS WIDER THAN THE OTHER) AS A FEATURE TO
REDUCE THE RISK OF ELECTRIC SHOCK. THIS PLUG WILL FIT IN A POLARIZED OUTLET ONLY ONE WAY. IF
THE PLUG DOES NOT FIT FULLY IN THE OUTLET, REVERSE THE PLUG. IF IT STILL DOES NOT FIT, CONTACT A
QUALIFIED ELECTRICIAN. NEVER USE WITH AN EXTENSION CORD UNLESS PLUG CAN BE FULLY INSERTED. DO
NOT ALTER THE PLUG.
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
AVERTISSEMENT ! IMPORTANTES CONSIGNES DE
SÉCURITÉ :
CETTE LAMPE PORTATIVE EST MUNIE D’UNE FICHE POLARISÉE (UNE LAME PLUS LARGE
QUE L’AUTRE). CE DISPOSITIF DE SÉCURITÉ DIMINUE LE RISQUE DE DÉCHARGES ÉLECTRIQUES PUISQUE LA
FICHE NE S’INSÈRE DANS LA PRISE QUE D’UN SEUL CÔTÉ. SI ELLE N’ENTRE PAS DANS LA PRISE, INVERSEZ-
LA. SI ELLE N’ENTRE TOUJOURS PAS, CONTACTEZ UN ÉLECTRICIEN QUALIFIÉ. N’UTILISEZ JAMAIS AVEC UNE
RALLONGE SAUF SI LA FICHE S’INSÈRE ENTIÈREMENT. NE MODIFIEZ PAS CE DISPOSITIF DE SÉCURITÉ.
AVERTISSEMENT :
POUR ÉVITER LES DÉCHARGES ÉLECTRIQUES, INSÉREZ LE BOUT LARGE DE
LA FICHE DANS LA GRANDE FENTE ET POUSSEZ JUSQU’AU BOUT.
¡PRECAUCIÓN! INSTRUCCIONES DE SEGURIDAD
IMPORTANTES:
ESTA LÁMPARA PORTÁTIL TIENE UN ENCHUFE POLARIZADO (UNA DE SUS
PATAS ES MÁS ANCHA QUE LA OTRA) PARA REDUCIR EL RIESGO DE UNA DESCARGA ELÉCTRICA. ESTE ENCHUFE
ENCAJARÁ EN CUALQUIER TOMACORRIENTE POLARIZADO SÓLO DE UNA MANERA. SI EL ENCHUFE NO CALZA
COMPLETAMENTE EN EL TOMACORRIENTE DÉLE LA VUELTA. SI AÚN NO ENCAJA, COMUNÍQUESE CON UN
ELECTRICISTA CALIFICADO. NO UTILICE UNA EXTENSIÓN SI NO PUEDE INSERTAR EL ENCHUFE COMPLETAMENTE.
NO ALTERE EL ENCHUFE.
PRECAUCIÓN:
PARA PREVENIR UNA DESCARGA ELÉCTRICA, HAGA COINCIDIR LA PATA ANCHA DEL
ENCHUFE CON LA RANURA ANCHA, INSERTE TOTALMENTE.
INS110013 REV051611