![background image](http://html1.mh-extra.com/html/oricom/anu800/anu800_fitting-instructions_1650549001.webp)
ANU800 UHF CB ANTENNA
FITTING INSTRUCTIONS
Pack includes
•
Heavy duty barrel spring base
•
Fibreglass radome
•
Grub screw and hex key to secure the fibreglass pole
•
Low-loss coaxial cable (4.5m)
•
Pre-terminated FME connector and PL259 adaptor
IMPORTANT- Always fit in accordance with State Road & Traffic Safety Guidelines
Installation
1. Remove the shroud protecting the cable at the base of the antenna.
2. Install the spring base onto the bracket (not supplied). Tigten in a clockwise
direction using a hexagon wrench or spanner. IMPORTANT: Do not exceed 50N.
3. Remove the cap from the top of the spring base
and install the fiberglass
extension pole on to the base by turning in a clockwise direction and secure in p
la
ce
with the grub screw (using the hex key provied). Hand tighten only MAX. 15N.