DIAL
—Rotate the dial to customize your
watering schedule
STATION
—Press to select the station you want
to program
RESET
—Press to clear all programming
MANUAL/CLEAR
—Press to water
manually or to clear programming within a
specific program
+/- Buttons
—Use these buttons to adjust time
and system setup
2 Outlet HOse Faucet timer
IMPORTANT PLEASE READ!
TIMER FEATURES
AUTO
—Timer waters according to your
customized schedule for both stations
SET CLOCK
—Set the time of day
START TIME
—Select what time you would like
each Station to start
HOW LONG
—Determine how long to water
each Station
HOW OFTEN
—Choose how often you will water
each Station
OFF
—Turn off all watering
WHEN ExpECTING FREEzING
TEMpERATURES, TIMERS SHOULD
BE REMOvED FROM THE HOSE
FAUCET AND STORED INDOORS TO
AvOID pOTENTIAL FREEzE DAMAGE.
FILTER TRApS DIRT pARTICLES,
pROLONGING LIFE OF TIMER.
CLEAN FILTER REGULARLy AND
REpLACE IF WORN.
HOSE TAP
CONNECTION
STATION 1
OUTLET
+/-
BUTTONS
MANUAL/
CLEAR
STATION 2
OUTLET
STATION
FILTER
DIAL
RESET
QUICK START
INSTALLING THE BATTERIES
1. Remove the tray on the back of the timer by
sliding or pulling it out.
2. Insert two AA (1.5V) alkaline batteries (not
included) and replace the tray.
Note:
Firmly replace the battery tray to insure
water resistance and increase battery life. You will
know the battery tray is fully inserted if it does not
pull out easily.
pROGRAMMING THE TIMER
SET CLOCK
1. Turn dial to SET CLOCK.
2. Using the +/- buttons, set the time of day,
including AM and PM.
3. Turn dial to save changes.
START TIME
1. Turn dial to START TIME.
2. Select the station you would like to program
by pressing the STATION button.
3. Using the +/- buttons, set your start time,
including AM and PM.
4. Turn dial to save changes.
HOW LONG
1. Turn dial to HOW LONG.
2. Select the station you would like to program
by pressing the STATION button.
3. Using the +/- buttons, select watering
duration from 1 to 240 minutes.
4. Turn dial to save changes.
HOW OFTEN
1. Turn dial to HOW OFTEN.
2. Select the station you would like to program
by pressing the STATION button.
3. Using the +/- buttons, set your watering
frequency. You can choose to water every
6 hours, 12 hours, or from 1 to 7 days.
MINS
DAYS
EVERY
p 801 295 9820
f 801 951 5815
www.fluid-studio.net
1065 South 500 West
Bountiful, Utah 84010
proof no:
3
date:
09.05.13
des:
SH
spck:
job no: N/A
client:
ORBIT
sku:
58910
upc:
N/A
file name:
58910-24 rA.indd
software:
InDesign CS6
colors
additional instructions:
·
Font sizes cannot be smaller than 7 pt.
·
· Proofing Code:
color non
printing
Die
PMS
???
color non
printing
Glue Area
color non
printing
Product Position
PMS
???
Registration
Black
Printers are responsible for
meeting print production
requirements. Any changes
must be approved by the
client and Fluid Studio.
printed piece must meet
designated specifications
on this form.
dimensions:
flat: w: 12.0" h: 6.0"
finished: w 3.0" d: 0 h 3.0"
© 2013 Fluid Studio. This
work is the property of Fluid
Studio, and cannot be used,
reproduced or distributed
in any way without their
express permission.
