1
CAUTION: This information is subject to change without prior notice.
Copyright 2012, Opticon Sensors Europe BV, all rights reserved.
This manual may not, in whole or in part, be copied, photocopied, reproduced, translated or converted to any
electronic or machine readable form without prior written consent of Opticon Sensors Europe.
THE GENERAL USE AND FUNCTIONING OF THE BAR CODE SCANNER IS DESCRIBED IN THIS DOCUMENT. ALSO
GENERAL SETUP INSTRUCTIONS TO GET STARTED ARE DESCRIBED IN THIS DOCUMENT. FOR FURTHER
INSTRUCTIONS CONSULT OPTICON OR YOUR LOCAL DEALER.
OPN2002/3/4 batch demo
application
(Version RFG35416 (OPN2002/3), RFIS0940 (OPN2004))
The batch demo application for the OPN2002/3/4 demonstrates its capabilities to store
barcode data in a file and retrieve this file onto a local PC. The files can either by retrieved
by using the OPN2002/3/4 as USB Mass Storage Device (MSD) or can be received using the
NetO protocol by using USB-‐VCP and/or the CRD2000 multi cradle (for OPN2002 only).
Since the OPN2002/3/4 terminals don't have a display to show any instructions this demo
application implements a user interface that consists entirely of using just the 2 keys to
scan barcodes. This brief setup guide describes all features as well as handling instructions.
More product details, additional support and more configuration options to customize this
application to your own preferences (by using the Universal menu book) will be updated at
www.opticon.com
1
Capabilities of the Batch demo application
The following features are currently supported:
•
Scans and stores barcodes into a database file on the internal RAM disk.
•
Retrieve the barcode data file on a local PC or laptop using the NetO protocol by
either USB-‐VCP or the CRD2000 multi cradle.
•
Use the OPN200/3/4 as USB Mass Storage Device (MSD) to retrieve the barcode
data file.
•
OSE Universal menu book support to configure all barcode decoders, pre-‐ and
suffixes, read modes and various other options.
•
Storing of configurations in non-‐volatile memory to allow all settings to be restored
after a reset.
•
Configurable output format of the database file.
•
Easy software upgrading by USB-‐VCP or the CRD-‐2000 multi cradle (RS232) using
Appload.
Summary of Contents for OPN2002
Page 19: ... 19 ...
