background image

3½”

Drum Chuck

291 Griffith Road  Unit 1, Stratford, ON, N5A 6S4, Canada

Phone: 1-519-271-7611

Fax: 1-519-271-8892

E-Mail: [email protected]

1 - 8 0 0 - 5 6 5 - 7 2 8 8

For all your woodturning needs!

w w w. o n e wa y. c a

3½”, 5½”, & 8” 

Drum Chuck

Instructions

8”

Drum Chuck

5½”

Drum Chuck

This package contains:

1 pce 3-1/2" Drum Chuck Body

Part No. 3004

1 pce 3-1/2" Former / Glue Ring

Part No. 3007

1 pce Self Adhering Neoprene Ring

Part No. 3009

1 pce Removal Lever

Part No. 2574

2 pcs M5 * 16 Socket Head Cap Screw
2 pcs M8 * 10 Set Screw
1 pce 4mm Hex key

Part No. 3008

Part No. 2979

Part No. 2980

This package contains:

1 pce 5-1/2 Drum Chuck Body

Part No. 2954

1 pce 5-1/2" Former / Glue Ring

Part No. 2955

1 pce Self Adhering Neoprene Ring

Part No. 3001

1 pce Removal Lever

Part No. 2574

2 pcs M5 * 16 Socket Head Cap Screw
2 pcs M8 * 10 Set Screw
1 pce  4mm Hex key

This package contains:

1 pce 8" Drum Chuck Body

Part #2968

1 pce 8" Former / Glue Ring

Part #2969

1 pce Self Adhering Neoprene Ring

Part #3002

1 pce Removal Lever

Part #2574

2 pcs M5 * 16 Socket Head Cap Screw
2 pcs M8 * 10 Set Screw
1 pce 4mm Hex key

Summary of Contents for 3008

Page 1: ...art No 2574 2 pcs M5 16 Socket Head Cap Screw 2 pcs M8 10 Set Screw 1 pce 4mm Hex key Part No 3008 Part No 2979 Part No 2980 This package contains 1 pce 5 1 2 Drum Chuck Body Part No 2954 1 pce 5 1 2 Former Glue Ring Part No 2955 1 pce Self Adhering Neoprene Ring Part No 3001 1 pce Removal Lever Part No 2574 2 pcs M5 16 Socket Head Cap Screw 2 pcs M8 10 Set Screw 1 pce 4mm Hex key This package con...

Page 2: ...adaptor to the drum chuck carefully screw the assembly onto your lathe spindle It should go on smoothly without excessive play or binding 2 Screw it all the way on until the adaptor face contacts the spindle shoulder 3 Next lock your spindle and unscrew the chuck just slightly so you can give it a firm swift spin consequently snapping the chuck home Alternatively use the removal lever to bump the ...

Page 3: ... pieces just sit on the face of the chuck and if unbalanced centrifugal force will cause them to slide off An object like a bowl will sit inside the chuck somewhat and will be much more resistant to moving from centrifugal force Keep the speed low and use the largest chuck Make sure the piece is flat and smooth for best results Put in the tailstock if possible 3 Note After your piece of neoprene h...

Page 4: ...stock can then be used to re center the piece on the vacuum chuck quite easily If you are having trouble centering a piece apply only a small amount of vacuum so that you can pop the piece on and off easily to make centering easier Manufacturers Warranty Date Purchased This ONEWAY product is backed by a warranty period of 5 years from the date of purchase The Neoprene supplied with this product is...

Reviews: