background image

45MG — Getting Started Guide

1

 

Intended Use

The 45MG is designed to measure thicknesses of industrial and commercial materials. Do not use the 
45MG for any purpose other than its intended use.

Instruction Manual

Before use, thoroughly review the 

45MG User’s Manual

 (P/N: DMTA-10022-01EN), and use the 

product as instructed. The User’s Manual contains essential information on how to use this Olympus 
product safely and effectively. The 45MG User’s Manual is available on the documentation CD (P/N: 
45MG-MAN-CD [U8147024]) that is shipped with the 45MG, or can be downloaded at 
www.olympus-ims.com. Keep the documentation CD in a safe, accessible location.

Safety Signal Words

Indicates an imminently hazardous situation calling attention to a procedure, practice, or the like, 
which, if not correctly performed or adhered to, could result in death or serious personal injury.

Indicates a potentially hazardous situation calling attention to a procedure, practice, or the like, which, 
if not correctly performed or adhered to, could result in death or serious personal injury.

Indicates a potentially hazardous situation calling attention to a procedure, practice, or the like, which, 
if not correctly performed or adhered to, could result in minor or moderate personal injury, material 
damage, particularly to the product, destruction of part or all of the product, or loss of data.

45MG

Getting Started Guide

Summary of Contents for 45MG









Reviews: