background image

Ozone Machine

Hanging Bracket

STEP 7B.

 Hang Ozone

Machine by inserting Hanging

Bracket through the shelf rack.

STEP 6.

 Once the frame is fully assembled, place the

 

fabric shell over the frame to complete assembly.

An opening is located on either side of the back of the

 

fabric to allow the Ozone Machine power cord to run

 

th

r

ough and plug into a wall outlet. 

STEP 7A.

 Hanging option for

the Ozone Machine. Attach the

Hanging Bracket on the back of

the Ozone Machine. 

See the

Ozone Machine Instruction Manual

for operating settings.

CAUTION!

 Read the Ozone Machine

Instruction Manual and warning label tags

carefully before operation.

V061416

Ozone Closet – Instructions for Assembly

Customer Service Line: 1-877-575-3173

One Year Limited Warranty

www.

odor

crusher.com

MoJack Distributors, LLC  

|

  3535 N. Rock Road, Wichita, KS 67226

1-877-575-3173  

|

  www.theMoJack.com

NEED HELP?

 Please contact our customer service line

BEFORE returning to the store. For help with assembly,
or if you are missing a part, please call our Customer Service
Department at 1-877-575-3173.

STEP 5.

 Place the assembled top

section onto the top of the vertical

poles. Assembly of the frame is 

now complete.

STEP 4.

 Continue building

up from the assembled middle

section by inserting poles

(D) and (E) and end connectors

(A1) and (A2) as the diagram

shows.

STEP 2.

 Building

up from the 

assembled bottom

section, insert poles

(D) and (E) and

end connectors

(A1) and (A2) as

the diagram shows.

STEP 1.

 Start by assembling the top and bottom sections. Insert parts (B) and (C)

into parts (A1) and (A2) as shown below. Insert one hanging rod (F) into top section.

Note:

 Short shelf (C) should

be inserted into the stickered

side of (A2).

Bottom Section:

Top and Middle Sections:

Note:

 All metal parts

must be inserted firmly and

completely into the plastic parts.

C

 5 ea

Short Shelf

B

 3 ea

Long Shelf

E

 16 ea

Short Vertical Pole

F

 2 ea

Hanging Rod

D

 4 ea

Long Vertical Pole

A2

 3 ea

End connector

A1

 10 ea

End connector

STEP 3.

 Place the assembled 

middle section onto the top of 

the vertical poles.

Reviews: