Version 0.5
19 December 2012
www.iHome.eu
Quick start:
Tag Reader EU
Technical specs
Normal operating voltage
2x AA 1,5V batteries
Frequency range
868.42 MHz
Wireless Range
min 150 meters in a mesh network
Protocols supported
ISO15693, ISO18000-3, Tag-it™, RFID
Buzzer-sound
Approx. 60dBa at 10 cm distance
Basic Operations
-
The
TagReader
can arm/disarm a security system.
-
The
TagReader
can read RFID-tags.
-
The
TagReader
has the possibility for the user to manually insert codes.
-
The
TagReader’s
indicator light will react differently on each action.
-
The
TagReader
has a buzzer, which can be used as walk-in/walk-out notification
(alarm is being disabled/activated).
H
ow it operates
After a successful inclusion the
Tag
Reader
can be mounted on the wall.
When pressing the Home or Away button you have 1 second to start using the manual code buttons, if you do
not press any manual code buttons the tag reader will be starting up and you have 6 seconds to show a RFID-
Tag in front of the reader.
With a controller you can request the battery level.
Mounting
1.
Before mount, the
Tag Reader should
be included into a Z-Wave network and associated.
2.
Use a flat screwdriver at the inlets on the sides to gently unlock the back cover.
3.
Use the supplied screws to mount the cover to the wall.
4.
Place two AA 1,5V batteries into the device.
5.
Mount the
TagReader
onto the back cover.
6.
Make sure to close it well on all sides.
7.
Mounting is completed when the led blinks for a full second.
Include or exclude in Z-Wave network
1
1.
Press and hold the
Tamper
switch
for 2 seconds and release to start the inclusion or exclude process.
2.
When classic inclusion failed, the product will start Network Wide Inclusion automatically.
1
Make sure your Z-Wave controller is in the correct operation mode (include or exclude).
Home
& Away
Indicator LED
Tag area
Tamper switch
