STEP 1 – CONNECT THE OBi300 ATA TO THE INTERNET
Connect your OBi300 ATA to the internet through a wired or wireless connection.
CONNECT VIA WIRED CONNECTION
1. Remove the OBi300 ATA from the box and plug in the power cable.
2. Use the included network cable to connect to an available port on your internet
router—OR—to connect wirelessly, please follow the instructions on page 3,
Connect Via Wireless Connection.
Note: You will need the ObiWiFi USB dongle to connect wirelessly (sold separately).
3. Plug your existing telephone into the phone port on the OBi300 ATA.
4. When registered, your OBi300 ATA will display three green lights (could take up
to 5 minutes).
SETUP OVERVIEW
Follow these 4 steps:
Step 1. Connect the OBi300 ATA to the internet through a wired or wireless connection
Step 2. Set up your ONEplace password and voicemail PIN
Step 3. Set your emergency response e911 location
Step 4. Test your line for dial tone. Alaska Communications will email you with a
scheduled date to move your service and complete activation
OBi300 Adapter Setup Guide
Page 1 - Version 1.0
Updated 09/06/18
Step 1
Connect the OBi300
ATA to the Internet
Step 2
Setup Your ONEplace
Voicemail Password
and PIN
Step 3
Set Your Emergency
Response e911
Location
Step 4
Test Your Line
