![background image](http://html.mh-extra.com/html/northstar/ns459392/ns459392_quick-start-manual_1708783001.webp)
Fully unpack the contents of the air
compressor and lay out all
accessories .
Remove all product components &
review the product instruction
manual to confirm all components
have been supplied with the unit.
Remove the instruction manuals from
the black manual holder tube, and
read all safety & user instructions
carefully.
Note:
There are two separate
instruction manuals. One for the
motor & one for the air compressor.
Assemble both of the wheels onto the
compressors wheel brackets, using the
large bolts & nuts supplied with the
product. Tighten with a 30mm socket
on a ratchet or breaker bar.
Unbolt the compressor from the plywood
packing base using a 13mm spanner,
then assemble the rubber feet onto the
leg frame using the nuts & bolts supplied.
Tighten using a 13mm spanner & socket.
1
2
3
4
5
6
7
8
9
PART NO. NS459392
NorthStar
416lpm (FAD) 13.7 CFM
Petrol Air Compressor 75lt
QUI
CK
ST
AR
T G
UI
DE
Have questions relating to assembly or operation of your product, call KINCROME on
1300 657 528
Page 1/2
SC
AN
TH
E
Q
R C
O
DE
W
ITH
Y
O
U
R
M
O
BIL
E
DEV
IC
E
TO
V
IEW
T
HE F
U
LL
SET
U
P
&
O
PE
RA
TIO
N
V
ID
EO
F
O
R
TH
IS
ITE
M
.
Assemble the handle to under the
pump base plate using the bolts &
nuts supplied with the product.
Tighten using 2 x 13mm spanners.
THESE INSTRUCTIONS ARE TO BE USED AS A GUIDE ONLY AND ARE NOT INTENDED TO REPLACE THE FULL INSTRUCTION MANUAL PROVIDED WITH YOUR PRODUCT.
ALWAYS READ THE INSTRUCTION MANUAL FOR FULL DETAILS RELATING TO SAFETY INSTRUCTIONS, ASSEMBLY, OPERATION AND MAINTENANCE OF YOUR PRODUCT.
ALWAYS MAKE SURE YOUR PRESSURE WASHER IS ON STABLE LEVEL GROUND BEFORE CHECKING OIL LEVELS.
Using a funnel, empty the entire
contents of the bottle of engine oil
supplied with the product into the
motor crankcase, through the
dipstick hole. Check the oil level
before use.
The Compressors twin V pump is supplied
already filled with oil. Check and verify the
pump oil level by visually inspecting the
pump oil level sight glass. Verify that the
oil level is at least ½ way up the sight glass.
Fill the petrol tank located on the top
of the air compressor with Unleaded
Petrol.