background image

1

  Operating Instructions and Parts List 

AR112

First Choice When Quality Matters

NORTH

AMERICA

Please read and save these instructions.  Read carefully before attempt-
ing to assemble, install, operate or maintain the product described.  Pro-
tect yourself and others by observing all safety information.  Failure to 
comply with instructions could result in personal injury and/or property 
damage!  Retain instructions for future reference.

AR112 - 012009

www.arnorthamerica.com

Electric Pressure Washer

Specifications:

   

M

ax

 

M

ax

 

M

ax

 

 

 

U

nit

  M

odel

 

PSi 

GPM 

t

eMP

 

V

oltaGe

 

a

MPS

 

W

eiGht

  AR112 

1600 

1.58 

122°F 

120V 

11 

18 lbs

  S

afety

 G

uidelineS

:

This manual contains information 
that is very important to know 
and understand.  This information 
is provided for SAFETY and to 
PREVENT EQUIPMENT PROBLEMS.  
To help recognize this information, 
observe the following symbols.

Warning indicates a potentially 
hazardous situation which, if not 
avoided, COULD result in death or 
serious injury.

Caution indicates a potentially 
hazardous situation which, if not 
avoided, MAY result in minor or 
moderate injury.

NOTE or NOTICE:  Information that 
requires special attention.

i

MPortant

This pressure washer is equipped 
with a microswitch sensitive 
to water flow.  This Total Stop 
System (TSS) senses water flow 
in the pump.  When the trigger 
is released, water stops flowing 
through the pump.  The TSS then 
automatically turns the motor 
off to protect the pump from 
overheating.

Summary of Contents for AR112













Reviews: