YP6K01(11)
6MQA5411-01
Printed in China
En
Procedure for Pairing for the First Time (for Android™ Users)
Here, pairing refers to the setting used to connect the camera and smartphone or tablet (below, “smart device”)
through Bluetooth.
Parts of the Camera
Photo button
Movie button
k
button
N-Mark
(NFC antenna)
Before Pairing
Camera
• Insert a microSD memory card with sufficient free space into the camera.
• Check that the battery is sufficiently charged so that the camera does not turn off during the procedure.
Smart device
• Two apps are available: “SnapBridge” and “
SnapBridge 360/170
”. Use “
SnapBridge 360/170
” when
pairing your device with this camera.
•
Do not pair from the Bluetooth setting screen of the smart device.
Pairing Procedure
1
Check that the camera is off (the screen is off).
• To turn off the camera, press and hold the movie button for at least three seconds.
2
Enable Bluetooth and Wi-Fi® on the smart device.
•
Do not pair from the Bluetooth setting screen of the smart device.
3
Install the SnapBridge 360/170 app.
4
Press the movie button or photo button to turn on the camera.
5
Press
H
or
I
to highlight a language, and press the
k
button to select it.
6
Press
I
to scroll through the screen, select
Options
, and press
the
k
button.
B
If You Select Later
If
Later
is selected, you can follow the procedure below to display the screen in step 6
and perform pairing later.
Press the
k
button to display the menu
M
c
(setup) menu
M
Camera settings
M
Network menu
M
Connect to device
.
set SnapBridge later
from the Network menu,
select Later.
Options
Later
