![background image](http://html.mh-extra.com/html/new-scale-technologies/m3-ls-3-4-15-xyz-mpm-inverted/m3-ls-3-4-15-xyz-mpm-inverted_system-manual_1678111001.webp)
© New Scale Technologies, Inc. MPM System Manual, June 9, 2017
P a g e
|
1
Multi-Probe Micromanipulator (MPM) System Manual
This document describes assembly, installation and manual adjustments of a Multi-Probe
Micromanipulator (MPM) System. The products covered by this manual include:
Product Model
Description
MPM-System Kit
Includes mechanical hardware, instructions, USB Hub and MPM Software
MPM-Ring-72-DEG
Mounting Ring for 72-Degree Section
Quantity Required:
One for 1-2 probes
Two for 3-4 probes
Three for 5 probes
MPM-Platform (option)
Mounting plate, (4) legs, (8) angle supports
MPM-4 DOF Arm-Upright
MPM Four-DOF manual positioner for upright operation.
MPM-4 DOF Arm-Inverted MPM Four-DOF manual positioner for inverted operation.
M3-LS-3.4-15-XYZ-MPM-
Upright
Three-axis motorized micromanipulator assembly for MPM system for upright
operation. Includes:
(3) M3-LS-3.4-15 Linear Smart Stages, and adapter hardware
(1) M3-USB-3:1-6V Interface Electronics
M3-LS-3.4-15-XYZ-MPM-
Inverted
Three-axis motorized micromanipulator assembly for MPM system for
inverted operation. Includes:
(3) M3-LS-3.4-15 Linear Smart Stages, and adapter hardware
(1) M3-USB-3:1-6V Interface Electronics
For more information about using software to control the system, please refer to the
New Scale
Pathway Multi-Probe Micromanipulator Software Guide.
MPM-4 DOF Arm-Upright
on a MPM-Ring-
72-Deg section
MPM-4 DOF Arm-Inverted
on MPM-Ring-72-Deg
sections mounted to MPM-Platform