![background image](http://html.mh-extra.com/html/nec/lt40/lt40_quick-connect-manual_250332001.webp)
Quick Connect Guide
MultiSync LT84/LT140
Step1
ME
NU
ENTER
CA
NC
EL
SELECT
POWER
STATUS
ON
/OFF
SOURCE
Connect the supplied power cable.
Connect the supplied 15pin-15pin signal cable.
Always power down
before you hook up.
PC CONTROL
USB
RGB INPUT
S-VIDEO
VIDEO
AUDIO
L
(
MONO
)
R
PC CARD
ACCESS
MOUSE OUT
For Mac, use the supplied
pin adapter to connect to the
computer 's video port.
Step2
Step3
Turn on the projector.
ME
NU
ENTER
CA
NC
EL
SELECT
POWER
STATUS
ON
/OFF
SOURCE
AUTO
ME
NU
E
NTER
CA
NC
EL
SELECT
POWER
STATUS
ON
/OFF
SOURCE
AUTO
NOTE: To turn off the projector, press and
hold the POWER button for a minimum
of two seconds.
Power button
Step4
Set up the Projector
Zoom ring
Focus ring
To adjust the projector' s focus or to zoom in and out, use
the Focus/Zoom ring on the lens.
If necessary, adjust the front or rear feet to
properly position the projected image on the
screen.
If the projected image does not appear
square to the screen then use keystone cor-
rection for proper adjustment.
ME
NU
EN
TE
R
CA
NC
EL
SELECT
POWER
STATUS
ON
/OFF
SOURCE
AUTO
ME
NU
EN
TE
R
CA
NC
EL
SELECT
POWER
STATUS
ON
/OFF
SOURCE
AUTO
ME
NU
E
NTE
R
CA
NC
EL
SELECT
POWER
STATUS
ON
/OFF
SOURCE
AUTO
Printed in Japan
78038391