background image

 

© 2019 NavePoint, LLC   

 

v20190912-01 

 

 

OWNER’S MANUAL: NavePoint 42U Server Cabinet 

 

 

 

 

Keep this information for further reference. 

 

Thank you for purchasing a NavePoint product.  If you have any questions regarding the installation or use of your product, please 

call us at 888.505.1363. 

 

Please examine the product for any damaged parts. If any part is damaged or missing, contact NavePoint for assistance. Do not 

attempt to install or use product if it has been damaged.   

 

Improper installation or use of this product could result in damage to the product, other equipment, or personal injury. NavePoint 

cannot be held responsible for damage to equipment or personal injury resulting from improper use or installation of product.   If 

product is intended to store/mount equipment, please ensure the equipment stored/mounted does not exceed the specified weight 

capacity. 

 

Limitations of Liability:  In no event will NavePoint, LLC. be liable for any damages, whether direct or indirect, special, punitive, 
incidental or consequential damages (including, but not limited to, lost profits or revenue, loss of use, lost business opportunities or 
loss of goodwill) or for the costs of procuring substitute products, arising out of or in connection with the use of the product, 
whether such liability arises from any claim based upon contract, warranty, tort (including negligence), product liability or otherwise, 
whether or not seller has been advised of the possibility of such loss or damage.  In no event will seller’s total cumulative liability, 
from all causes of action and all theories of liability, exceed the total amounts actually paid to seller by customer under the order 
that gives rise to any liability hereunder.

 

 

 

 

Summary of Contents for 42U











Reviews: