National Instruments
™
, and ni.com
™
, and SCXI
™
are trademarks of National Instruments Corporation. Product and company names mentioned herein
are trademarks or trade names of their respective companies.
321927B-01
©
Copyright 1998, 2001 National Instruments Corp. All rights reserved.
February 2001
INSTALLATION GUIDE
SCXI -1381K T
ERMINAL
B
LOCK
H
OUSING
K
IT
This guide explains how to assemble your SCXI-1381K terminal block
housing kit and includes dimensions for designing your circuit boards.
Introduction
The SCXI-1381K is intended for developers of custom SCXI terminal
blocks who design and lay out custom circuit boards for terminal blocks.
The SCXI-1381K terminal block housing kit includes the unassembled
components you need to build a custom SCXI terminal block. Your kit
contains all the following mechanical components of an SCXI terminal
block:
•
The metal enclosure
•
Front and back panels
•
Connectors, not including the circuit board
•
A 96-position, right-angle DIN connector for attaching to your custom
circuit board, if needed
What You Need to Get Started
To use your SCXI-1381K to build a custom SCXI terminal block, you need
the following:
❑
SCXI-1381K terminal block housing kit, containing the following:
–
SCXI-1381K Terminal Block Housing Kit Installation Guide
–
Terminal block base
–
Terminal block cover
–
Strain-relief bar
–
Two self-adhesive rubber foam strips
–
Two 6–32 by 5/8 in. screws
–
One number 4 eyelet solder-lock terminal
–
One 4–40 by 1/4 in. panhead screw
™
