1
Cable Cubby 1252 MS • Installation Guide
This guide provides instructions for an experienced technician to install the Extron
Cable Cubby 1252 MS.
T
he Cable Cubby 1252 MS is a furniture-mounted enclosure for cable access,
connections, and AC power. The Cable Cubby 1252 MS provides the freedom to either
match the surface of the table or use a unique lid design that complements the room décor.
Unused cables can be stored out of the way while remaining connected to the presentation system.
NOTE:
This product is intended for use only with Extron UL listed power modules (not included).
Planning
Check with local and state regulations before starting the installation
Ensure that the planned installation complies with national and local building and electrical codes.
Ensure that the planned installation complies with the Americans with Disabilities Act or other accessibility requirements.
Check all parts and equipment before installation
Ensure that all parts are present in the kit.
Ensure that necessary tools and equipment are available for the installation.
Kit Contents
Part
Quantity
Part
Quantity
Connectivity bracket
1
Retractor pin and clip
1
#4-40 flat head module
screws
4
#6-32 pan-head mounting
screws and star washers
8
AAP frame plate
1
#4 flat head lid insert wood
screws
4
Cable grommet plate
1
Trim brackets
2
Hole plugs
6 (3/8"),
2 (1/4")
#8 pan head wood mounting
screws
12
Retractor bracket
1
ZipClip screws and washers
(for mounting of optional
ZipClip power supply)
2
Extr
on
