INSTALLATION GUIDE
NI WSN-3291 Outdoor IP Enclosure
For NI WSN-32
xx
Series Devices
This installation guide describes how to install and use the National Instruments WSN-3291 outdoor IP
enclosure. The NI WSN-3291 outdoor IP enclosure is an accessory that provides NI WSN-32
xx
devices
with a minimum ingress protection (IP) rating of IP65 against dust and water in harsh outdoor or
industrial environments. For more information about IP ratings, refer to the
section. For the NI WNS-32
xx
device specifications, refer to the
device user guides
available at
ni.com/manuals
.
Figure 1 shows the NI WSN-3291 outdoor IP enclosure components.
Figure 1.
NI WSN-3291 Outdoor IP Enclosure Components
Note
You need a #1 flat and a #2 Phillips screwdriver to install the NI WSN-3291.
The NI WSN-3291 kit includes the following items:
•
NI WSN-3291
•
Two M16 gland shells
•
Two gland inserts, standard size
•
Two gland inserts, reduced size
•
Two gland plugs
•
Two lock nuts
•
2.4 GHz antenna
•
IP Boot
•
IP Sleeve
•
Antenna wire connector
1
IP Sleeve
2
Antenna
3
Antenna Wire Connector
4
Lock Nuts
5
Gland Inserts, Reduced
6
Gland Plugs
7
Gland Inserts, Standard
8
Gland Shells
9
IP Boot
3
4
5
8
7
6
1
2
9
