background image

W415-1968 / 06.26.19

ADD MANUAL TITLE 

Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON, L4M 0G8 Canada / 103 Miller Drive, Crittenden, Kentucky, USA, 41030

Phone 1 (866) 820-8686 • www.napoleon.com • [email protected]

                                  CERTIFIED TO THE AMERICAN NATIONAL STANDARD: 

ANSI _______ FOR _____________________________________________________

INSTALLER: 

Leave this manual with the appliance

CONSUMER: 

Retain this manual for future reference

ADD PRODUCT CODE HERE (TRADE GOTHIC LT STD FONT)

NATURAL GAS MODELS:

PROPANE GAS MODELS:

Product Name / Code

(MUST use title from Price Book)

ADD ____ ILLUSTRATED

ADD PRODUCT IMAGE

CERTIFICATION

LOGO

SAFETY INFORMATION

- Do not store or use gasoline or other 
fl ammable vapors and liquids in the vicinity of 
this or any other appliance.

WHAT TO DO IF YOU SMELL GAS

:

• 

Do not try to light any appliance.

• 

Do not touch any electrical switch; do not 
use any phone in your building.

• 

Immediately call your gas supplier from a 
neighbour’s phone. Follow the gas    
supplier’s  instructions.

• 

If you cannot reach your gas supplier, call 
the fi re department.

- Installation and service must be 
performed by a qualifi ed installer, service 
agency, or the supplier. 
- This is an unvented gas-fi red heater that 
uses air (oxygen) from the room in which 
it is installed. Provisions for adequate 
combustion and ventilation air must be 
provided. Refer to section “combustion 
and ventilation air provisions”.

FIRE OR EXPLOSION HAZARD

Failure to follow safety warnings exactly 
could result in serious injury, death, or 
property damage.

WARNING

!

ENGLISH 

$10.00

FOR INDOOR USE ONLY

IF INSTAL OPERATION, ADD SERIAL 

NUMBER LABEL HERE

IF SEPARATE MANUALS, ADD “PLACE 

BARCODE LABEL ON THE OWNER’S MANUAL”

Insert appropriate statement (see margins).

This appliance may be installed in an aftermar-
ket, permanently located, manufactured-home 
(USA only) or mobile home, where not 
prohibited by local codes.

This appliance is only for use with the type of 
gas indicated on the rating plate. This appliance 
is not convertible for use with other gases.

INSTALLATION AND 

OPERATION MANUAL

Arlington™ VF

GVFS20-1N

GVFS20-1P

CERTIFIED TO THE AMERICAN NATIONAL STANDARD:

ANSI Z.21.11.2B, VOLUME II FOR UNVENTED ROOM HEATERS

SAFETY

 

BARRIER

Summary of Contents for Arlington GVFS20-1N





























Reviews: