1
R
INSTALLATION
INSTRUCTIONS
G E M - R P 3 D G T L
Digital Keypad
WI982B 2/04
© Napco 2004
Quick Start:
1. Referring to the control panel wiring diagram, connect siren, auxiliary power, PGM
output, remote bus, earth ground, zone and telephone wiring. NOTE: See
Installation Instructions for the appropriate control panel.
2. Connect AC power first and then the battery.
3. Configure the keypad (see page 3).
4. Access the Easy Menu Driven (Dealer Program) Mode:
Press
A456789
D
Press NO (
F
Until “17” appears on the keypad display.
Press YES (
E
)
to Enter Easy Menu Driven Dealer Program Mode.
The Easy Menu Driven Program Mode allows you to complete all basic programming
functions by answering questions which allow the automatic programming of the
control panel.
NOTE:
The programming examples in this manual reflect the GEM-RP3DGTL keypad
connected to a GEM-P1632 panel. When used with the GEM-P816 panels, the program-
ming is identical except for the panel limits such as: Areas = 1; Zones = 16; User Codes
= 16; Zone Doubling = Not available.
Dealer Code
This Guide includes programming instructions for the
following control panels:
•
GEM-P816 (v.9A or prior)
•
GEM-P1632 (v.9A or prior)
This Guide is to be used in conjunction with the Programming Instruction Manual for the respective
control panel.
GEM-P816 - WI995 and WI1182
(v.10 or later)
GEM-P1632 - WI897 and WI1148
(v.10 or later)
GEM-P3200 - WI818 and WI1184
GEM-P9600 - WI777 and WI1185
GEM-RP3DGTL Keypad
R
COMPUTERIZED SECURITY SYSTEM
ARMED
STATUS
SYSTEM ARMED
01/01/97 12:00AM
1 2
4
3
5 6
7 8 9 0
A
B
C
D
E
F
G
NEXT/YES
PRIOR/NO
AREA
GEMINI
ENT A1
17
INTERIOR
BYPASS
FIRE/TBL
SYS TBL
CHIME
For the GEM-P3200
and GEM-P9600, use
the Master Security
Code printed on the
control panel
microprocessor shield.
