background image

ETW38 and ETW12 

Rev. 02/27/15

ETW38, ETW12

3/8" Torque Range ......................................................................... 10-100 ft.-lbs.
1/2" Torque Range ......................................................................... 25-250 ft.-lbs.
Accuracy (*1) .......... CW ±2%, CCW ±2% of reading 10% to 100% of full scale
Data Memory Values .........................................................................................  3
Operation Modes ....................................................................... Peak Hold/Track
Unit Selection ............................................................... ft-lb, in-lb, N-m, & kg-cm
Head Type .................................................................................................... Fixed
Gear teeth  ........................................................................................................32
Audible Alarm .................................................................................................. Yes
Buttons ................................................................................................................4
LED Indicator ............................................................................................ 3 LED's
Batteries ........................................................................................................ 2 AA
Battery Life-Continuous Operation (*2) ...................................................... 60 Hrs
Battery Life-Standby (*2) .............................................................................1 Year
Operating Temperature ....................................................................41ºF ~ 108ºF
Storage Temperature ........................................................................ -4ºF ~ 122ºF
Humidity ...................................................................Up to 90% non-condensing

SPECIFICATIONS

AlwAys reAd  
instructions 
before using 
tools 

AlwAys weAr  
sAfety 
goggles

not 
wAterproof

ETW38, ETW12

3/8", 1/2" Dr. Electronic Torque Wrenches

WARNING

Summary of Contents for Carlyle ETW38



















Reviews: