TM
M V M E 5 1 0 0 S e r i e s
V M E P r o c e s s o r M o d u l e s
♦
PowerPC 7400 or PowerPC 750
™
microprocessor with 32KB/32KB L1 cache
♦
Up to 2MB of secondary backside cache
♦
100 MHz front-side bus
♦
64MB, 128MB, or 512MB of on-board
ECC SDRAM—expandable up to 1GB
with optional RAM500 memory expansion
modules
♦
Up to 17MB Flash memory
♦
Dual IEEE P1386.1 compatible 32/64-bit
PMC expansion slots
♦
64-bit PCI expansion mezzanine
connector allowing up to four more PMCs
♦
Dual 16550 compatible async serial ports
♦
Dual 10BaseT/100BaseTX Ethernet
♦
32KB NVRAM and time-of-day clock with
replaceable battery backup
♦
Four 32-bit timers, one watchdog timer
♦
On-board debug monitor
♦
Single VME slot even when fully
configured with two PMC modules and
both add-on memory mezzanines
Supercomputing levels of performance in a scalable, single-board
computer
The MVME5100 is a high-performance VME processor module featuring the
Motorola Computer Group (MCG) PowerPlus II architecture with a choice of
PowerPC
®
processors—either Motorola’s MPC7400 with AltiVec
™
technol-
ogy for algorithmic-intensive computations or the low-power MPC750.
Based on an integrated PCI bridge–memory controller ASIC designed by
MCG, PowerPlus II takes memory performance to new levels with 582MB/s
memory read bandwidth and 640MB/s burst write bandwidth. Plus, Power-
Plus II architecture supports full PCI throughput of 264MB/s without starving
the CPU from its memory.
The MVME5100 is designed to meet the needs of OEMs servicing the military
and aerospace, industrial automation, and semiconductor process equipment
market segments.
