Hand Crimp Tool for 1.25mm (.049") Pitch Wire-to-Board Crimp Terminals
Doc No: ATS-20021803HM Release Date: 01-27-17
UNCONTROLLED COPY
Page 1 of 6
Revision: A
Revision Date: 01-27-17
INSULATION CRIMP
BRUSH
STRIP LENGTH
BELL MOUTH
CUT-OFF
TAB
BEND
DOWN
BEND UP
ROLLING
CONDUCTOR
CRIMP HEIGHT
TWISTING
SEAM
WIRE
Application Tooling
Specification Sheet
Modular Crimp Head
Order No. 2002180370
Hand Crimp Tool
Order No. 2002180300
FEATURES
A full cycle ratcheting hand tool ensures complete crimps
Ergonomically designed soft handles
Precisely designed crimping profiles with simple contact positioning
Easy handling due to outstanding force ratio
Modular Crimp Head is removable and can be use in the Air Powered Tool Order No.63816-0100,
accompanied by Air Powered Crimp Adapter (Order No. 63816-0700).
Can also be used in the Battery Powered Tool Order No.63816-0200 (110 V) or 63816-0250 (220 V),
accompanied by Battery Powered Crimp Adapter (Order No. 63816-0600).
SCOPE
Products: 1.25mm (.049") Pitch Wire-to-Board Crimp Terminal, 26-30 AWG, UL1061 wire.
Terminal Series No.
Terminal Order No.
Reel Form only (1)
Wire Size
Insulation Diameter
Strip Length
IPC/WHMA-A620
Terminal
AWG mm²
mm
In.
mm
In.
mm
In.
505431
505431-1000
26-30 NA 0.81-1.02 .032-.040 0.78-1.02 .031-.040 1.40-1.60 .055-.063
(1)
Customer to cut off terminal from reel: 0.10mm (.004”) maximum Cut-off Tab.
To achieve optimum IPC-A620 insulation crimps, use this insulation OD range.
Overall insulation OD specification for terminal.
DEFINITION OF TERMS
TYPE 4A
