background image

For use with: EM1400 External Blower

 

IMPORTANT: 

Save these instructions for the local electrical 
inspectors use.  

INSTALLER: 

Please leave these installation instructions with 
this unit for the owner 

OWNER: 

Please Retain these instructions for future 
reference. 

WARNING:

  TO REDUCE THE RISK 

OF FIRE, ELECTRIC SHOCK OR 

INJURY TO PERSONS, OBSERVE THE 

FOLLOWING: 

1. Use this unit in the manner intended by the 

manufacturer.  If you have questions, contact 

the manufacturer or dealer. 

2. Before installation, servicing or cleaning unit, 

switch power off at the service panel and 

lock the service disconnecting means to 

prevent power from being switched on 

accidentally.  When the service 

disconnecting means cannot be locked, 

securely fasten a prominent warning device, 

such as a tag, to the service panel. 

3. Installation work and electrical wiring must be 

done by a qualified person(s) in accordance 

with all applicable codes and standards, 

including fire-rated construction codes and 

standards. 

4. Sufficient air is needed for proper combustion 

and exhausting of gases through the flue of 

the fuel burning equipment to prevent 

backdrafting.  Follow the heating equipment 

manufacturers guideline and safety standards 

such as those published by the National Fire 

Protection Association (NFPA), and the 

American Society for Heating, Refrigeration 

and Air Conditioning Engineers (ASHRAE), 

and the local code authorities.  

5. When cutting into wall or ceiling, do not 

damage electrical wiring or other hidden 

utilities.  

6. Ducted fans must always be vented to the 

outdoors  

7. To reduce the risk of fire use only metal 

ductwork  

8. This unit must be grounded 

CAUTION  

1.

For general ventilating use only.  Do not use 

to exhaust hazardous or explosive material 

and vapors 

2.

To avoid motor bearing damage and noisy 

and/or unbalanced impellers, keep drywall 

spray, construction dust, etc. off power unit 

3.

Please read specification label on product 

for further information and requirements  

4.

Electrical circuit including speed control 

must be rated 6amps minimum

MODERN-AIRE VENTILATING 

READ AND SAVE THESE INSTRUCTIONS

 

Reviews: