background image

Page 16 

 
Name:……………………………………………………………………………..…… 
 
 
Address:……………………………………………………………………………….. 
 
…………………………………………………………………………………………. 
 
…………………………………………………………………………………………. 
 
 
 
Store where purchased: ……………………………………………………………….. 
 
 
Model   REFERENCE 150MkII 
 
 
 
Date of purchase:…………………………….Serial number:………………………… 

MJ ACOUSTICS  warrants to the original purchaser only, that this product is free from defects in material and 
workmanship under normal use within three years from date of purchase, in the United Kingdom only, provided that 
registration is submitted to M J Acoustics within 28 days from date of purchase. All parts, except the external cabinet 
finish are warranted as stated from date of purchase.  Under this warranty M J Acoustics agrees to repair any defect or at 
the company’s discretion, replace the faulty component(s) without charge for parts and labour provided the unit is returned 
carriage paid both ways.  Defective parts will be replaced if in the sole judgement of MJ ACOUSTICS they be deemed 
defective over and above that considered to be normal wear and tear. 
 
This warranty does not apply to equipment showing abuse, misuse, neglect or damage or to parts that in the judgement of 
MJ ACOUSTICS are not defective or have been used for purposes outside the scope of its design , nor does it extend to 
any equipment which may have been tampered with, altered or repaired outside an authorised MJ ACOUSTICS service 
station, and on which the serial number has been defaced, modified or removed. This warranty is in lieu of any other 
warranty expressed or implied and there is no other warranty or warranties valid for your purchase. No one is authorised 
to assume any liability on behalf of MJ ACOUSTICS or impose any obligation on it in connection with the sale of any 
equipment other than as stated in this warranty and outlined above. 
 
MJ ACOUSTICS’ liability, for any defective product, is limited to repair or replacement of the product, at our sole option. 
MJ ACOUSTICS shall not be liable or responsible, under any circumstances, for such indirect or consequential damages 
as from interrupted operations or other causes howsoever related.  Additionally  the  Reference 150 is not intended for use 
in a commercial environment and the warranty  applies for domestic use only. 
 
If your unit requires service it should be sent to MJ ACOUSTICS service department, any shipping charges are the 
responsibility of the owner, this includes return shipping charges. SERVICE DEPARTMENT:-  MJ Acoustics, Service 
Department, 9 Venture Court, Boleness Road, WISBECH, Cambridgeshire. PE13 2XQ 

WARRANTY 

Reference 

150

  User’s Manual 

 

 

Please print clearly 

14/12/2005 (Ref – 150) 

Page 1 

User’s Manual 

Model

 

Reference

  

150

MkII

 

Table of Contents 

Safety Instructions  …………………..  page 2 
Precautions  

………………….. page 

Introduction   

…………………..  page 3 - 4 

Display Menu            ..…...…..………..  page 5 - 6 
Memories  

………………….. 

page 

Connectivity   

…………………..  page 7 - 8 

High Level Lead      ……………………   page 9 
Panel Layout & Features  ……………..  page 10 - 12 
Remote & Remote Eye  ….………..…..    page 12 
Set-up Hints & Tips  …………………..  page 13 
Specifications & Contents  ….…..……  page 14 
Warranty         

…………………..  page 16 

Natural Bass Impact Unparalleled in the Entertainment Environment

 

 

14/12/2005 (Ref – 150) 

Professional Reference 

Sub-Woofer 

 

For Home Cinema, 

Audiophile Specialists & Studios 

Summary of Contents for Reference 150









Reviews: