![background image](http://html1.mh-extra.com/html/minelab/x-terra-305/x-terra-305_getting-started-manual_1801342001.webp)
For complet
e produc
t specification and opera
tional guidance,
read the full length user manual a
t ww
w.minelab
.com.
WARRANT
Y TERMS
Please refer t
o
ww
w.minelab
.com/warrant
y-conditions
for full w
arran
ty t
erms and conditions
. Register y
our produc
t
warr
anty online a
t
regist
er.minelab
.com
COMPLIANCE
Informa
tion to the U
ser (FCC P
art 15.105)
THIS DEVICE C
OMPLIES WITH P
ART 15 OF
THE FCC RULES.
Oper
ation is subjec
t to the f
ollowing t
wo c
onditions: (1) this
device ma
y not cause harmful in
ter
fer
ence, and (2) this devic
e
must accept an
y inter
fer
ence r
eceiv
ed, including in
ter
fer
ence
that ma
y cause undesir
ed operation.
NOTE: C
lass B Devic
es
This equipmen
t has been test
ed and found t
o comply with
the limits for a C
lass B digital device, pursuan
t to par
t 15 of
the FCC Rules
. These limits ar
e designed to pr
ovide r
easonable
prot
ection against harmful in
ter
fer
ence in a r
esidential
installation.
This equipmen
t generat
es, uses and c
an radia
te r
adio
frequenc
y energy and
, if not installed and used in accor
dance
with the instruc
tions, ma
y cause harmful in
ter
fer
ence t
o
radio c
ommunications
. How
ever, ther
e is no guaran
tee tha
t
inter
fer
ence will not oc
cur in a par
ticular installa
tion. If
this equipment does c
ause harmful inter
fer
ence t
o radio or
television r
eception, which c
an be determined b
y turning the
equipment off and on, the user is enc
ouraged t
o try t
o corr
ect
the inter
fer
ence b
y one or more of the f
ollowing measur
es:
•
Reorient or r
elocat
e the rec
eiving antenna
•
Increase the separ
ation bet
ween the equipmen
t and rec
eiver
•
Connec
t the equipment in
to an outlet on a cir
cuit diff
eren
t
from tha
t to which the r
eceiv
er is connec
ted
•
Consult the dealer or an e
xperienced r
adio/TV t
echnician
for help
Warning:
Any changes or modific
ations not e
xpressly appr
oved
by M
inelab Elec
tronics c
ould void the user
’s authorit
y to oper
ate
this equipment.
Australia & Asia P
acific
+ 61 8 8238 0888
minelab@minelab
.com.au
Eur
ope & Russia
+353 21 423 2352
minelab@minelab
.ie
Nor
th, South & C
entral America
+1 630 401 8150
minelab@minelab
.com
Middle East & Afric
a
+971 4 254 9995
minelab@minelab
.ae
Minelab®,
X-TERR
A™ ar
e trademarks
of M
inelab Elec
tronics
Pty.
Ltd
. Images
and graphics
are f
or illustr
ation
purposes only
; pr
oduct c
onfiguration
and specifications ma
y var
y from those sho
wn. Please refer t
o the produc
t manual for detailed oper
ational guidanc
e.
4901-0267-1 EN
Specific
ations
X-TERRA 305
Discrimina
tion Patt
erns
1, 2 & All Metal
Discrimina
tion Scale
12
Opera
ting Frequencies (kHz)
Change c
oil to change fr
equency 7.5 & 18.75
Audio
Speak
er and Headphone O
utput
Batt
ery
4 x AA
Standar
d Coil
9" Conc
entric 7.5 kH
z (W
aterpr
oof)
Minelab E
lectronics
,
PO Box 35, S
alisbury S
outh
South A
ustralia 5106
2
2
3
3
4
1
1
3
4
1
2
3
1
2
4
Getting Star
ted Guide
Assembly
| Follow the steps to put together your X-TERRA 305
2. Assemble shafts
1.
Loosen the twistlocks by rotating them
counter-clockwise.
2.
Press the spring loaded pin in the lower shaft
and slide it into the middle shaft until the pin
reaches the adjustment holes. The pin will click
into place.
3.
Attach the middle shaft to the upper shaft in
the same way.
4.
Lock the position of the shafts by rotating
twistlocks clockwise.
3. Attach armrest/stand
1.
Place the armrest onto the top of the upper
shaft. Position the armrest just below your
elbow, then line up the boss in the armrest
with the nearest hole in the shaft.
2.
Insert the screw through the stand, upper shaft
and armrest. Tighten the screw carefully.
3.
With the velcro side facing upwards, thread
the armrest strap through both slots in the
armrest. Ensure the end of the strap will be
fastened outwards from your arm.
1. Attach coil to lower shaft
1.
Insert the two rubber washers into the holes
on either side of the yoke.
2.
Slide the yoke into the yoke bracket on top of
the coil.
Ensure that the spring loaded pin in the lower
shaft is underneath.
3.
Insert the plastic bolt through the yoke and the
yoke bracket.
4.
Fasten with the plastic bolt - Do not
overtighten.
4. Connect control box & coil
1.
Push the control box onto the end of the
handle until it fits into place.
2.
Wrap the coil cable around the lower and
middle shaft enough times to take up the
slack.
3.
Use the velcro tabs provided to secure the coil
cable against the shaft.
4.
Align the coil connector and plug into the
socket in the back of the control box, lightly
tightening the retaining ring.
Audio
X-TERRA 305 detectors have an external
loudspeaker for detecting without headphones.
A range of other audio options are available. Please
refer to the full instruction manual for further
information.
Battery
The X-TERRA uses 4 x AA batteries which are not included with the detector.
1.
Access the battery compartment via the battery door located on the side of the control box. Slide the
battery compartment door upwards with your thumb.
2.
Place individual batteries into the compartment as illustrated, ensuring the positive (+) and negative (–)
contacts match the diagram on the control box.
3.
Close the battery door by pushing and sliding it downwards.