background image

REV

. 5/24/2016   INST99-6535B

INSTALLATION INSTRUCTIONS FOR PART 99-6535B

METRA.  The World’s best kits.

metraonline.com

© COPYRIGHT 2016  METRA ELECTRONICS CORPORATION

 

CAUTION!

 

 All accessories, switches, climate controls panels, 

and especially air bag indicator lights must be connected before 
cycling the ignition. Also, do not remove the factory radio with 
the key in the on position, or while the vehicle is running.

 

• ISO DIN radio provision with pocket

• 

Painted matte black

• A) Radio trim panel • B) Radio brackets

 

• C) Pocket • D) (4) #8 x 3/8” Phillips screws 

KIT FEATURES

KIT COMPONENTS

WIRING & ANTENNA CONNECTIONS

 (sold separately)

Wiring Harness: • XSVI-6523-NAV
Antenna Adapter: • 40-EU55

• Panel removal tool • Cutting tool 
• T-25 Torx screwdriver

TOOLS REQUIRED

Fiat 500X 2016-up

99-6535B

A

Table of Contents

B

C

D

Dash Disassembly

 ................................................. 2

Kit Assembly

 

ISO DIN radio provision with pocket ...................... 3

Summary of Contents for 99-6535B

Page 1: ...he factory radio with the key in the on position or while the vehicle is running ISO DIN radio provision with pocket Painted matte black A Radio trim panel B Radio brackets C Pocket D 4 8 x 3 8 Phillips screws KIT FEATURES KIT COMPONENTS WIRING ANTENNA CONNECTIONS sold separately Wiring Harness XSVI 6523 NAV Antenna Adapter 40 EU55 Panel removal tool Cutting tool T 25 Torx screwdriver TOOLS REQUIR...

Page 2: ...g the radio into the dash Figure C 6 Unplug and remove the radio from the dash Figure C 7 Cut the shaded areas in the dash cavity to gain suitable depth for the new radio chassis CAUTION The vents are located directly behind the area to be cut use extreme caution to not cut into them Be careful you may want to make multiple cuts Figures D E Continue to kit assembly Figure A Figure C Figure B Figur...

Page 3: ...t using screws supplied with the radio Figure B 4 Insert the radio trim panel into the factory radio trim removed in step 4 of dash disassembly Figure C 5 Locate the factory wiring harness and antenna connector in the dash complete all necessary connections to the radio and test the radio for proper operation Metra recommends using the proper mating adapter from Metra and or AXXESS 6 Mount the rad...

Page 4: ...eps toward a better tomorrow Metra recommends MECP certified technicians IMPORTANT If you are having difficulties with the installation of this product please call our Tech Support line at 1 800 253 TECH Before doing so look over the instructions a second time and make sure the installation was performed exactly as the instructions are stated Please have the vehicle apart and ready to perform trou...

Reviews: