background image

Dolphin 2x2 Gyro Pool Cleaner 

 |  Operating Instructions

1

 Contents

1. INTRODUCTION .............................................................................2
2. SPECIFICATIONS ............................................................................2
3. WARNINGS AND CAUTIONS ........................................................2
 

3.1. Warnings ................................................................................2

 

3.2. Cautions .................................................................................2

4. POOL CLEANER PARTS ..................................................................3
5. USING THE POOL CLEANER .........................................................4
 

5.1. Setup ......................................................................................4

 

5.2.  Putting the Pool Cleaner into the pool ...............................5

 

5.3.  Removing the Pool Cleaner from the pool .........................5

 

5.4. Maintenance ..........................................................................6

 

5.5. Off-season storage ...............................................................7

6. POWER SUPPLY ...............................................................................8
7. REMOTE CONTROL UNIT  ............................................................9

Dolphin 2x2 Gyro

 

Robotic Pool Cleaner

Operating Instructions

EN

Summary of Contents for 2x2 Gyro











Reviews: