Maytech Waterproof Remote Control User Manual_20191012 by Eric and Eileen
1 / 17
Mayte MTSKR1905WF Waterproof Remote Control
User Manual V2.0
1. Functions:
1.1 It’s the first full waterproof remote in the industry and works well in water, especially for electric
surfboards;
1.2 It’s the first wireless charging remote control in the industry;
1.3 With OLED display, easy to view throttle and battery voltage;
1.4 Standard PWM signal output, can be used in electric surfboards, electric skateboards, rc cars, rc boats,
rc airplanes, robotics, etc;
1.5 It supports motor RPM detection by motor phase wire or hall sensor wire;
1.6 It supports VESC communication protocol. Datas in VESC can be obtained and displayed through the
UART port;
1.7 It has one 30V 3A Relay mechanical switch and one 20V 2A transistor electronics switch for esk8 lights,
esurf water pump using, etc.
2. Configuration
：
Remote
（
Transmitter
）
:
IP rating: IP67
Triggers: Throttle trigger and Brake trigger(ESK8 mode: Throttle and Brake; Esurf mode: Throttle and Cruise
speed control, No Brake)
Sensor Type: Non-contact Hall sensor
CPU: STM8
Display: 128x64 OLED, yellow and blue screen
Battery: 3.7V/420maH
Full-charged working time: more than 2 hours
Charge interface: QI standard wireless charging interface
Transmission distance: Air 10M; Water 1M
Receiver:
Power supply: 5V OR 3.7V, automatic switch
Throttle signal output: 1-2ms 50Hz PWM 5V Max
Voltage detection range: 5-80V ±5%
Hall/Motor phase wire RPM detection range: 0-80000 ERPM
Relay switch max current: 3A
Transistor switch max current: 2A
VESC communication protocol Baudrate: 115200bps
