1
1
www.mastercool.com
52325 THERMAL IMAGING CAMERA
33˚
33˚
Micron
SD
1. LCD
2. POWER KEY
3. COLOR PALETTE
4. MODE
5. UNIT
6. MENU
7. MICRO SD
8. MINI USB
10. INFRARED LENS
11. TRIGGER
12. BATTERY COVER
9. VISIBLE CAMERA
SETTING UP YOUR THERMAL IMAGER
INSTALLING THE MICRO SD CARD
Before you begin to use your thermal imaging camera, a microSD card must be inserted.
A microSD card is a memory device that allows you to store images recorded by your
thermal imaging camera. Please follow the steps below to insert the microSD card.
PLEASE NOTE:
You can easily damage the microSD card by improper operation. Please be
careful when inserting, removing, or handling the microSD card.
On one side of your thermal imaging camera there is
a rubber plug protecting the microSD slot and the USB
connector from dust and damage. Please pull it up
slightly and gently, and turn it 90° clockwise.
1. Insert the microSD card and push it all the way inside
the slot until you hear a “click”, the microSD card is
now locked in place.
2. Once the microSD card is installed, place the rubber
plug back to secure the area against damage.
Page 1
SECTION 1: Setting Up your TERMAL IMAGER(TIM)
Installing the microSD card
Before you begin to use your TIM, a microSD card must be inserted. A
microSD card is a memory device that allows you to store images, and
videos recorded by your TIM. There is an 8GB microSD card included in the
product package. Please follow the steps below to insert the microSD
card.
1.
Please identify the 8GB microSD card, and
remove it from its package.
On one side of your TIM there is a rubber plug
protecting the microSD slot and the USB
connector from dust and damage. Please pull it
up slightly and gently, and turn it 90°
clockwise.
2.
Insert the microSD card
with the narrow side
towards the slot, and the
white lettering facing
toward the screen.
Push it all the way
inside the slot until you
hear a “
click
”, and the
microSD card is now locked
in place.
3.
Once the microSD card is installed
place the rubber plug back to
secure the area against damage.
microSD
adapter
microSD
memory
You can easily damage the microSD
card by improper operation.
Please be careful when inserting,
removing, or handling the microSD
card.
Rubber
Plug
Sensor
Lens
Trigger
Batteries
Compartment
microSD
card slot
USB Type B
Connector
BASIC OPERATION
1. Power On: Press the POWER key (2) to power on the unit.
2. Taking a thermal image and temperature: After powering on,
simply aim at the measure target with the INFRARED LENS (10)
to get the fusion images and temperature immediately.
Please make sure the target area is within the field of view.
Note:
There is a cursor on the screen. The cursor shows the
temperature of the object located in the middle of the screen.
3. Save Images: Press the TRIGGER (11) to save the thermal
image to the micro SD card.
4. Power Off: Press the POWER [ ] key (2) for more than 3 sec. to power off the unit. Auto
power off time is about 1 minute. (Please see the FUNCTIONS section to learn how to
adjust the auto off time.)
FUNCTIONS
• Display Mode: Press MODE [ ] key (4) to switch the display mode.
(Fusion-Thermal-Visual)
Note:
Fusion is the default mode.
• Color Palettes: Press COLOR PALETTE [
I
I
I
] key (3) to select the color palette,
(4 selectable color palettes).
O
O
p
p
e
e
r
r
a
a
t
t
i
i
n
n
g
g
M
M
a
a
n
n
u
u
a
a
l
l
f
f
o
o
r
r
T
T
I
I
M
M
0
0
3
3
T
T
h
h
e
e
r
r
m
m
a
a
l
l
I
I
m
m
a
a
g
g
e
e
r
r
C
C
a
a
m
m
e
e
r
r
a
a
The thermal imager camera can measure from -20~250°C (-4~482°F) and displays the thermal image and temperature.
Furthermore, thermal images can be saved to a micro SD card. Transferring images to the software is included for image report
generation from these saved images.
OPERATION
1.
Power on
Press Mode Key (
2
) or Trigger (
10
) to power on the unit.
2.
Taking a thermal image and temperature
After power on, simply aim the thermal imager camera at the measure target with Lens
(
9
) and get the thermal image and temperature immediately. Please make sure the
target area is within the field of view.
Note: There are three cursors on the screen. The cross sign shows the temperature of
the object located in the middle of the screen. Other two moving cursors indicate the
highest and lowest temperatures in the thermal image.
3.
Save thermal images
Press Trigger (
10
) to save the thermal image to the micro SD card, press Up Key (
3
) or
Down Key (
4
) to show the saved images. Press Mode Key (
2
) again to return to the
measurement screen.
4.
Color palettes
Press Color Palette Key (
6
) to select the color palette (4 selectable color palettes) to view thermal images.
Ironbow
Rainbow
High contrast
Grayscale
5.
C/°F/K
Press Unit Key (
5
) for C
°F or K transferred.
6.
Power off
Press Mode Key (
2
) for more than 5 sec. to power off the unit. Auto power off time is around 30 sec..
FUNCTIONS
Press Mode Key (
2
) for scrolling more display functions, then press Up key (
3
) or Down key (
4
) to change the
functions, then press Trigger (
10
) to confirm it.
Emissivity
The default emissivity is 0.95, or select other default emissivity: Matt:0.95, Semi-matt:0.8, Semi-glossy:0.6,
Glossy:0.3
Select Set value to adjust the emissivity (0.1 to 1 step .01).
HAL
You can select Set Min temp or Set Max item to adjust the High Alarm (HAL) or Lo Alarm (LAL) limits
(step .1).
LAL
Language
Selectable Chinese or English.
Backlight
Selectable 5 levels of brightness.
Set Time
Set the date and time in MM/DD/YYYY (month/day/year) and HH/MM/SS (hour/minute/second) formats.
Time stamp
Turn on Time stamp to save thermal images with real-time stamp.
Turn off Time stamp to hide date and time on stored thermal images.
Erase Image
Select Yes, All image! to clear all stored thermal images.
Reset
Select Reset to recover the factory setting data.
Set parameter
Select Use Median Value
to reduce noise in an image.
Select No Filter
to display real image noise.
STORAGE & CLEANING
It should be stored at room temperature. The sensor lens is the most delicate part of the thermometer. The lens should be kept
clean at all times, care should be taken when cleaning the lens using only a soft cloth or cotton swab with water or medical alcohol.
Allowing the lens to fully dry before using the thermometer. Do not submerge any part of the thermometer.
BATTERIES
The thermometer incorporates visual low battery indication as follows:
‘Battery OK’: measurements
are possible
‘Battery Low’: battery needs to be
replaced, measurements are still possible
‘Battery Exhausted’: measurements are
not possible
When the ‘Low Battery’ icon indicates the battery is low, the battery should be replaced immediately with AA, 1.5V batteries.
Please note: It is important to turn the instrument off before replacing the battery otherwise the thermometer may malfunction.
Dispose of used battery promptly and keep away from children.
SPECIFICATION
Thermal Image Resolution
32*31
Measurement Range
-20~250°C (-4~482°F)
Accuracy (Tamb=20~26°C)
2% of reading, or 2°C(4°F) whichever is greater
Thermal Sensitivity
0.1°C
Frame Rate
9Hz
Field of View
40*40 deg
Emissivity Range
0.95 default – adjustable 0.1 to 1 step .01
Focus
Focus free
LCD (inch)
2.8
LCD Type
Color
Image Storage
Stores up to 60000 images/GB,
Bitmap (BMP) file format.
Memory Type
Support 8G micro SD card
Sensor Filter (um)
8~14um
Interface
USB
Battery Type
AA*4
Battery Life (hr)(backlit)
6
Dimensions
94.65 x 74.03 x 233.68mm (3.73 x 2.91 x 9.20 inch)
Weight
411 grams(14.5 oz) including batteries (AA*4pcs)
EMC/RFI: Readings may be affected if the unit is operated within radio frequency electromagnetic field strength of approximately 3 volts per
meter, but the performance of the instrument will not be permanently affected.
* IP54 Splash Proof
IRONBOW
RAINBOW
HIGH CONTRAST
GRAY SCALE
Press COLOR PALETTE [
I
I
I
] key (3) for 3 seconds to enter the fixed range mode (the icon
of the fixed range mode is ) After that, the user can fix the range by pressing the
TRIGGER (11) while scanning.
• °C/°F: Press UNIT [
˚C
˚F
] key (5) to convert temperature unit.
• Display Functions: Press MENU [ ] key (6) for the display functions featured in the
chart below, then press the COLOR PALETTE [
I
I
I
] key (3) or MODE [ ] key (4) to
select the function. Press the UNIT [
˚C
˚F
] key (5) to set the function and then press the
TRIGGER (11) to select or confirm it.
Cursor Measurement
The cursor shows the temperature of the object located in
the middle of the screen.
Hide the cursor measurement
Brightness
3-level brightness: Low Medium High
3
Fusion Ratio
Fusion images by 3-level ratio of combining thermal and
visual images.
1
>
2
>
3
(
3
is the default mode)
