1
SAFETY:
This user manual should not be used in place of common sense. Use this equipment in a
manner that is specified with the vehicle manufacturer. Understand all the test procedures
before attempting to use this equipment. Follow all safety precautions.
• All diagnostic work should be performed with the engine off.
• Do not leave the vehicle unattended when the equipment is connected or operating.
• This equipment must be connected only to a fully charged 12VDC vehicle battery.
WARNING:
• Do not use any other type of power source to run this equipment.
• Do not use this equipment near a source of spark or ignition.
• Always use this equipment in a well-ventilated area.
• Always wear eye protection and gloves when using this equipment.
SPECIFICATIONS:
• Voltage: 12 VDC
• Input Pressure: Max 100 psi (8.2 bar)
• Output Pressure: Max 28 psi (190 kPa)
• Safety Pressure Relief: 120 (±5) psi
• Oil Fill Line Indicator: 3.4 oz (100 ml (±10 ml)
• Flow Meter: 0 - 0.040 in. (0 - 1.0 mm)
• Power Consumption: Max 6.5 Amps
• Operating Temperature: 0˚F to 140˚F (-17˚C to 60˚C )
• Operating Humidity: No Restrictions
• Operating Altitude: No Restrictions
• Vapor Output Hose: 10 feet
• Power Cable: 10 feet
• Pressure Supply: Air/Inert gas
• Dimensions: 11.8 x 8.1 x 11 in (300 x 205 x 280 mm)
• Weight: 11.5 lbs (5.2 Kg)
INCLUDED ACCESSORIES:
1. Two large inflatable block-off bladders with safety chains
2. 6” rigid smoke stack ring
3. Pressure sensor port adapter
4. Oxygen sensor port adapter
5. Temperature sensor port adapter
6. High intensity smoke illuminating battery powered flashlight
7. 8 oz smoke producing fluid
MACHINE COMPONENTS:
1. Smoke vapor switch
2. Smoke indicator light
3. Power source light
4. Pressure gauge
5. Pressure regulator
6. Flow meter with control knob
7. Oil fill
8. Smoke hose fitting & smoke hose cap fitting
9. Shop air/inert gas inlet
10. Maximum oil level
11. 12 VDC power cord connection
HEAVY-DUTY TRUCK DIAGNOSTIC SMOKE MACHINE INSTRUCTIONS
6
5
4
3
2
1
7
1
2
4
3
5
6
7
8
9
10
11
