Umbaubericht
Lokomotiven
LGB 20670 Track cleaning loco
Backfitting of a LGB “Track cleaning loco” with 3-pin-gear and an old DEG-electronic with a XL-
decoder.
The base PCB will be removed completely, light roof and front building light will be modified.
Pict.-1: LGB 20670
Needed Parts:
•
1x 8150001 XL-Decoder
•
Relais 24V / 5A (e.g. RTE24024 Schrack) with free-wheeling diode
•
Miscellaneous cables
Backfitting:
Remove rear (short) bonnet (Release 2 screws in the frontside).
Remove crossing bonnet in front of the driver’s cab (Remove 2 screws below the stairs).
Remove driver’s cab (2 screws in access ladder and 2 hidden in the fuel tank).
Remove front (long) bonnet (1 screw before the cleaning block and 2 in the bracket of the cleaning
block).
On the porch PCB swap the red with the black cable (Motor turns against driving direction).
(Who want’s a meeker cleaning don’t touch the cable and the cleaning motor turns with driving
direction)
Stand 15.04.2020
Seite 1 / 4
