FRC (Model C) Series
Fan Forced
Wall Heaters
File E21609
Installation & Maintenance Instructions
Dear Owner,
Congratulations! Thank you for purchasing this new heater manufactured by a division of Marley
Engineered Products. You have made a wise investment selecting the highest quality product in the heat-
ing industry. Please carefully read the installation and maintenance instructions shown in this manual.
You should enjoy years of efficient heating comfort with this product from Marley Engineered Products...
the industry’s leader in design, manufacturing, quality and service.
... The Employees of
Marley Engineered Products
TABLE 1
VOLTS
277
208
208
240/208
240/208
277/240
208
208
240/208
240
277/240
AMPS
10.8/5.4
19.2/9.6
11.1
16.7/14.4
8.3/7.2
9.7
14.4/12.5
7.2/6.3
23.1
13.4
20.0/17.3
11.6
17.3/15.0
MODEL #
FRC3027C
FRC4020C
FRC40203C
FRC4024C
FRC40243C
FRC4027C
FRC4820C
FRC48203C
FRC4824C
FRC48243C
FRC4827C
WATTS
3000/1500
4000/2000
4000
4000/3000
2000/1500
4000/3000
4000/3000
2000/1500
4800
4800
4800/3600
4800
4800/3600
WIRE SIZE
12 AWG
10 AWG
10 AWG
12 AWG
10 AWG
12 AWG
10 AWG
10 AWG
10 AWG
10AWG
10 AWG
10 AWG
Read Carefully -
These instructions are written to help
you prevent difficulties that might arise during installation
of heaters. Studying the instructions first may save you
considerable time and money later. Observe the following
procedures, and cut your installation time to a minimum.
TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK:
1.
Disconnect all power coming to heater at main service panel
before wiring or servicing.
2.
All wiring must be in accordance with the National and Local
Electrical Codes and the heater must be grounded.
3.
Verify the power supply voltage coming to heater matches the
ratings printed on the heater nameplate before energizing.
4.
This heater is hot when in use. To avoid burns, do not let bare
skin touch hot surfaces.
5.
Do not insert or allow foreign objects to enter any ventilation
or exhaust opening as this may cause an electric shock, fire,
or damage to the heater.
6.
Do not block air intakes or exhaust in any manner. Keep com-
bustible materials, such as crates, drapes, etc., away from
heater. Do not install behind doors, furniture, towels, or
boxes.
7.
A heater has hot and arcing or sparking parts inside. Do not
use it in areas where gasoline, paint, or flammable liquids are
stored.
8.
Use this heater only as described in this manual. Any other
use not recommended by the manufacturer may cause fire,
electric shock, or injury to persons.
9.
This heater is not approved for use in corrosive atmospheres
such as marine, green house, or chemical storage areas.
SAVE THESE INSTRUCTIONS
WARNING
!
2" (50.8mm)
1-5/16" (33mm)
1-21/32"
(42mm)
5/14"
(133mm)
Knockout
14-3/8"
(365mm)
19-3/16"
(487mm)
18-1/4"
464mm
15-21/64"
(389mm)
PH
1
1
3
1
3
1
1
3
1
3
1
BTU/HR
10,239/5120
13,652/6826
13,652
13,652/10,239
6826/5120
13,652/10,239
13,652/10,239
6826/5120
16,382
16,382
16,382/12,287
16,382
16,382/12,287
