background image

     

 

             K00342 

                                             IB-0620/0820/1020 
                ON A CORNELIUS ENDURO 200/250 ICE DISPENSER 

                                                            Installation Instructions 

 

1.

 

Set adapter on dispenser.  Position the adapter so that the front flange of the adapter will be up against the front lip of 
the dispenser.  Adapter may have to be moved towards the back of the dispenser. 

2.

 

Using the slotted holes in the adapter as a template, drill four (4) 9/64” diameter holes at the bottom of the slots.  
NOTE:  Do not drill deeper than 1/4” past the sheet metal.  Use a drill stop! 

3.

 

Fasten adapter to dispenser using the four (4) #8 screws supplied with the adapter kit. 

4.

 

Set the ice machine on top of the adapter.  Align holes in ice machine front angle with threaded bosses on the adapter. 

5.

 

Secure the ice machine to the adapter with two (2) #8-32 screws supplied with the kit. 

6.

 

Set the bin cover on the adapter, move backwards until the cover hits the stop, and lower the plastic cover insuring 
that the latch locks. 

7.

 

To remove the bin cover, twist the knob, lift up, and pull forward. 

Manitowoc Ice, Inc. 

2110 South 26

th

 Street, P.O. Box 1720, Manitowoc, WI  54221-1720 USA                                                                                                                                       

Telephone 920-682-0161, Fax - Sales: 920-683-7589, Service/Parts: 920-683-7585, Other: 920-683-7879                                             8014453 
Web Site - www.manitowocice.com                                                                                                                                                            04/04/03 

Place a large fillet of food grade RTV inside edge 
along both sides where adapter touches bin 

#8 Screw  
4 Places 

    Bin Cover 

#8-32 Screw 
 2 Places 

Adapter 

Deflector must stay in place

 

Reviews: