FOR MORE INFORMATION:
www.lorextechnology.com
LW2100AC1
QSG_EN_R1 Page 1
Contents:
Quick Start Guide
Digital Wireless Color
Camera with Antenna
Power Adaptor
for camera*
• Aim camera to best optimize the viewing
area: select a location that provides a clear view
of the area you want to monitor, which is free
from dust, and is not directly exposed to a strong
light source or direct sunlight.
• It’s always preferred to install the camera in a
sheltered location whenever possible.
• Avoid installing camera wherever there are thick
walls, obstructions, or interference
(i.e. transformers, microwave ovens or other
electrical equipment) between camera(s) and
receiver.
• Select a location for the camera that has an
ambient temperature between 14°F~122°F
(-10°C~50°C).
• Before starting permanent installation, have
another person hold the camera for you while
you verify its performance by observing the
image on a monitor.
InstALLInG tHe CAMeRA
Before you install the camera, carefully plan where and how it will
be positioned, and where you will route the cable that connects the
camera to the power adaptor.
InstALLAtIon WARnInGs
1. Carefully unpack the camera.
2. Mount the stand to the wall:
• Mark the position of the
screw holes on the wall.
• Drill holes and insert the
drywall plugs as needed.
• Firmly attach the stand
to the wall using the
provided screws.
3. Attach the camera to the
mounting stand. Adjust
the angle of the camera
until the desired view
is set. Tighten the
thumbscrews to secure
the desired camera
position.
*May not be exactly as shown
NOTE:
AVOID INSTALLING IN A
LOCATION WHICH REQUIRES
THE WIRELESS SIGNAL TO PASS
THROUGH CEMENT, CONCRETE
AND METAL STRUCTURES. THIS
WILL REDUCE THE
TRANSMISSION RANGE.
Mounting
Screws
CoLoR DIGItAL WIReLess InDooR/oUtDooR
ACCessoRy CAMeRA
LW2100AC1 - qUICk stARt GUIDe
Camera Mounting
Stand
Thumbscrews
